Log in

View Full Version : Lots for sale: drag radials, tail-lights, 3.55 ring and pinion, TPI electronics, etc


IROCZman15
03-13-2022, 08:45 PM
Selling off a bunch of stuff, if anyone wants more info on anything, just feel free to ask.

Prices do NOT include shipping. I am located in 07847 which is Roxbury NJ, so if you are local, might want to save on shipping. I am NOT going to ship the wheels/tires, those need to be picked up directly.
-Also, my old exhaust (headers, y-pipe, electric cutout, and hooker 3" cat-back) was going to all be for sale, but my cousin already bought it from me.

OEM 1987 rear IROC-Z wheels which are original to my car and were repainted and clear coated several years ago. The tires are the Mickey Thompson ET Street SS Drag radial tires that I used the past two years at the dragstrip AND on the street, even in the rain...and they were just fine in the rain. I made dozens of passes on them and they never failed me. They are 255/50/16 and have sufficient tread/use left on them. These tires cut several 1.4x sixty foot launches on nitrous and they only need a short 5-6 second burnout while at 19-22 psi and they will hook great. If you are looking for grip and traction, this is what you should buy. They sell for $255 each without a wheel. I am selling the pair of these (two wheels, two tires, mounted and balanced) for $250 total. Will not ship these.

https://live.staticflickr.com/65535/51904950050_44b57938eb_z.jpg

https://live.staticflickr.com/65535/51904308621_c7fb77bc99_z.jpg

https://live.staticflickr.com/65535/51904308616_ac75cd4d89_z.jpg




NOS wet-nitrous platge for TPI intakes. Bolts right onto a TPI intake. I used this for about 6 years and it worked great but I am not TPI anymore. Sim
$75
https://live.staticflickr.com/65535/51935885262_81722726fd_z.jpg





Some type of aluminum carburetor spacer. I think its for a mopar setup? I can measure it if someone wants me to.
$15
https://live.staticflickr.com/65535/51937185929_c9ed238093_z.jpg



Drake billet-aluminum hood pins. Bought these two years ago, and never installed them, just opened the package. I think they retail for around $100. I will take
$60
https://live.staticflickr.com/65535/51936871191_f0d402c6b4_z.jpg

https://live.staticflickr.com/65535/51937185914_742a324a6f_z.jpg

https://live.staticflickr.com/65535/51937185924_d61261e9b3_z.jpg

short and long center caps for the Jegs SSR wheels.
$5 each or 3 for $10
https://live.staticflickr.com/65535/51937481635_c4d36b2874_z.jpg


Champion radiator cap (never used) but will fit oem 3rd gen radiators.
$10
https://live.staticflickr.com/65535/51936871201_dbeaf5e4ea_z.jpg

IROCZman15
03-13-2022, 09:00 PM
US Gears 3.55 ratio ring and pinion set. I used this for 2 years in the car with my moser 12 bolt rear. They never gave me a problem, but for racing I went to a 3.91 gear ratio so these 3.55s came out. Hardly any wear. this is the link with the specs and they sell for $300 new
I am selling them for $120. (You will need to buy the shim/bearing kit)


https://live.staticflickr.com/65535/51935896267_6828251a5c_z.jpg

https://live.staticflickr.com/65535/51936952718_a5a00df2e5_z.jpg



Modified OEM camaro IROC-Z tail lights. These were the original ones on my car. I peeled them apart about 10 years ago and did the red tail-light mod with the translucent candy red paint inside the lens to eliminate the orange turn-signal color. This is 100% legal in New Jersey. . They are NOT painted on the outside of the lens, so with some plastic polish and elbow grease, you can get them to shine. I had installed a battery kill-switch into the separate black plastic piece on the passenger side, so there are some drill holes from that, but I know you can replace the black plastic at a cheap price.
$150 for both lights as seen

https://live.staticflickr.com/65535/51937196884_d9d1de0a83_z.jpg


https://live.staticflickr.com/65535/51937196889_c132679402_z.jpg


https://live.staticflickr.com/65535/51937492860_ba7252f864_z.jpg






OEM TPI fuel pressure regulator complete
$20
https://live.staticflickr.com/65535/51936942143_ea339f42bf_z.jpg


OEM camaro lug nuts, keyed lugs (with key), and some oem lug studs:
$20 for all of it
https://live.staticflickr.com/65535/51937481650_cb5433d6c7_z.jpg


https://live.staticflickr.com/65535/51935885232_e5d91d1f4d_z.jpg




Those little plastic dress covers that go under the oem style seats to hide the metal seat brackets:
$10 for all of em

https://live.staticflickr.com/65535/51937196934_85d2467774_z.jpg


I forget what this was for, some type of vacuum distribution block for TPI?
$5

https://live.staticflickr.com/65535/51936952723_67bc7cffe5_z.jpg

IROCZman15
03-13-2022, 09:17 PM
TPI style distributor with the electronic plugs in the back of the cap:
$50

https://live.staticflickr.com/65535/51937196924_fe450c8395_z.jpg


The corner spoiler "wings" for oem style wedge spoiler on some 3rd gen camaros:
$30 for the pair


https://live.staticflickr.com/65535/51936881421_fb467a7a11_z.jpg

https://live.staticflickr.com/65535/51936881431_21f941608b_z.jpg





AC delco re-man TPI ecu. This powered my car up until the day I pulled the engine out for the new engine, so it is 100% good
$50

https://live.staticflickr.com/65535/51937198379_a51d7af105_z.jpg

https://live.staticflickr.com/65535/51937494745_cabb31e8b4_z.jpg




Relay assembly from my 1987 iroc. ECU connector on teh side and then the normal relays (MAF, MAF burnoff, and I think Fuel pump?)
$30


https://live.staticflickr.com/65535/51935898292_d072357c2a_z.jpg



Working Mass Air Flow sensor and the rubber housing for TPI. (the pre-sensor screen is in place but the post-sensor screen I had removed)
$50


https://live.staticflickr.com/65535/51937198389_9988c15829_z.jpg


https://live.staticflickr.com/65535/51936883501_3e88464bd7_z.jpg




95% of the complete OEM 1987 TPI electronic harness. Almost everything is there like all injector connections, battery ring terminals, starter stuff, relays, ecm plugs, distributor stuff, etc) I think i only removed the Torque converter lock-up connector and wires, and the oil pressure spade terminal and coolant temp sender spade connector. If someone has a bunch of broken connectors, or just wants these oem connectors, this is a good chance to get some without paying $10 per connector on places like year-one. Selling this as is for $75, and I would hate to bring it to the recycle center even though i could probably get good money for the copper wire. Would hope someone could make better use of it. I hand-labeled almost every connector as I removed it from the car 2 years ago so that is helpful.
$75

https://live.staticflickr.com/65535/51936883551_9139fcab99_z.jpg

https://live.staticflickr.com/65535/51936883031_6d781aa0d1_z.jpg


https://live.staticflickr.com/65535/51936883611_0900c0098a_z.jpg

https://live.staticflickr.com/65535/51935898472_365ea3b144_z.jpg



OEM style steering wheel, just needs some cleaning up:
$15


https://live.staticflickr.com/65535/51936883696_daf2ced061_z.jpg



Alternator bracket (pass side) and power steering pump bracket (drivers side)
$10 total:

https://live.staticflickr.com/65535/51935897852_ed174b118f_z.jpg

IROCZman15
03-13-2022, 09:27 PM
OEM front drivers side and front passenger side seat belts and belt receiver setups:

$40 for the all of it

https://live.staticflickr.com/65535/51936955158_f75e4d374c_z.jpg






oem thirdgen camaro shifter and knob.
$15

https://live.staticflickr.com/65535/51936955033_fc5dc5f9cf_z.jpg

https://live.staticflickr.com/65535/51935898622_bce72bd0c8_z.jpg



Front fender inner brackets:
$10 for all 3

https://live.staticflickr.com/65535/51935898642_a67d7d2a72_z.jpg


3" wide kevlar Top fuel nitro engine supercharger belt:
$25

https://live.staticflickr.com/65535/51935898747_01bd6eb185_z.jpg


those foam triangle pieces that cover the upper rear shock mounts under the carpeting.
$5 for both


https://live.staticflickr.com/65535/51936883951_6eed5ed573_z.jpg




OEM strut tower mounts with plastic caps. bearings are still in good shape too
$40 for the pair:

https://live.staticflickr.com/65535/51937199269_4055038859_z.jpg



The whole oem steering linkage setup from my car. inner and outer tie rods, center link, pitman/idler arm?
$25

https://live.staticflickr.com/65535/51936955308_ffe992632e_z.jpg



SBC style (normal flow) water pump:
$20

https://live.staticflickr.com/65535/51935898897_6e41e11ffa_z.jpg


Modified combination valve (prop-valve to some people) :
$20

https://live.staticflickr.com/65535/51936884036_0b2e9f6bfe_z.jpg

IROCZman15
03-17-2022, 08:28 PM
Sold:
- TPI ECM computer
- TPI relay configuration
- entire TPI harness
- Seat Belts and receivers



everything else is still for sale

IROCZman15
04-01-2022, 05:00 PM
bump



and
MAF sensor sold
Vacuum block sold


sale pending on tail-lights


Will be bringing some of the stuff to Island Dragway next weekend for their spring swap meet since my buddies got a vendor space and have extra room for me to put some stuff out. so if interested in anything, you can find me at swap meet.

Sprayed 99
04-04-2022, 11:02 PM
Price for the seat track covers shipped to 08037?

IROCZman15
04-05-2022, 07:50 PM
I think I can fit them in a small box, instead of trusting a bubble-wrap envelope. It will probably cost about $5 or so. Would $15 grand total be ok? feel free to Pm me, and I will send you my paypal info. Also, the only ones I have are those 6 covers, I think there should have been 8 in total, but two were probably broken or lost a long time ago.

IROCZman15
04-27-2022, 07:49 PM
this is the final thread bump before I let it close out.

sprayed, if you want those plastics, just feel free to send me a private message and we will get them shipped to you.


Items that are sold and no longer available:
- seat belts
- TPI harness
- TPI ECU
- TPI relay block
- vacuum block
- MAF sensor and snorkel
- nitrous plate
- rear body corner spoiler pieces
- both taillights


Still for sale:
- everything else! Hoping someone buys the wheels/drag radials, they work awesome!