PDA

View Full Version : Automatic Trans ?


karr95
12-07-2004, 04:06 PM
I have automatic transmission from 91 v6 camaro. will this same automatic transmission work with a 305 or 350 from the same year?

Thanks

ar0ck
12-07-2004, 04:07 PM
I'm almost positive the bolt pattern of a v6 4-speed is different from a v8 transmission. So It will most likely not bolt up 100%

SpeakersGoBoom
12-07-2004, 09:08 PM
are you sure? TAs/Z28s/v6 camaros/v6 firebirds...i thought they all got the same 700r4 transmission setup. I thought the only real difference was the rear, set up to overcome the lack of power that the old 2.8s made.

NJSPEEDER
12-07-2004, 11:02 PM
they are all 700r4's, but teh 6cyl cars used a bolt pattern similar to the older buick/olds/pontiac pattern. internally they are the same as well, only changes to the governor weights and springs were made to control shift points.

later
tim

9secfirebird
12-08-2004, 03:30 PM
bellhousing is an inch shorter on the v6 trans, bolt pattern doesnt really matter. it wont bolt up and there is no way to make it.

mike

karr95
12-09-2004, 07:42 AM
Thanks guys, you've been a really great help.