Cure for the off season

[NJSPEEDER]

tru2chevy's girlfriend(mylittlepony) bought him an xmod for christmas. as soon as we got it together i knew i had to have one.
i think i can officially say that jsutin and i have gone off the deep end with this already. step 1 was to run to office max and buy a cheap digital scale that can weigh in grams(stock with cheap batteries my car weighs 201 grams :) ) so we coudl lay out a weight reduction program. step 2 is that we are trying to figure out how to build a simple timing system so we can drag race in his basement(1:28 scale 1/4 mile is 47.14ft :) )
i think everyone should get one of these right away :)
maybe i shoudl add it to my sig so i cna say i have an f-body that runs :D

"67 camaro, stage2 motor, 6.00 gears, ball bearing kit, soon to be weight nazi'ed"

later
tim

[ar0ck]

Ive been eyeballing those things, too bad they cost so dam much.

[NJSPEEDER]

Ive been eyeballing those things, too bad they cost so dam much.

they are worth every penny. i have already taken mine apart 4 or 5 times jsut lookin for ways to invent free mods :)
i already have a few tricks planned for that little car.

later
tim

[foff667]

how much are they and where can you get them?

[Wasted Youth]

we could just get RC cars and run each other in straight lines and run each other over....even crash into each other...would def. be fun...lol

[MyLittlePony]

::smacks head:: i've created monsters.... :banghead:


ok, actually, i kinda want one.
i bought it at radio shack, but im sure you can find them other places too

[Wasted Youth]

[url=http://www.xmodsrc.com/car-builder/] id def. run you guys with my rc...lol i just built one and it came to 130...if i lived closer id get one...lol you should bring them to the meet and mess around....lol

[12secondv6]

Can I add nitrous to it?

[camaro2you]

thad be awsume haveing a little nitrouse bottle probable possible if you felt like doing all of the tedious work:D

[NJSPEEDER]

how much are they and where can you get them?

radio shack sells them. the car costs $50, then there are whatever accessaries you want. and you will need a 9volt batt for the controller and 4AAA's for the car itself.
i spent around 100bucks so far on mine with the ball bearings and stage2 motor kit.

later
tim

[GrandmasterCow]

already have a skyline with the batteries, gears and motor, i have new grippy tires too and i had done the AWD but then removed it because it was gay. i soldered in another battery also and it juiced it just so much more now.

[ShitOnWheels]

Karen, look what you went and did. Sheesh

[BigAls87Z28]

HAHAHA!
I knew it would run before the 87!! I belive we alllllll called it that night. 8)

[BlueFBird]

i got one and broke it the same day i got it, i was so pissed a had a red vette.

[Tru2Chevy]

The Xmods are only available at Radio Shack....and they are def. worth the money.

Best x-mas present this year! (Although the air hockey table is a close second) Kare -> :kiss: <- me

- Justin

[Wasted Youth]

well when you guys are ready to race ill bring out my 4wd gas car with the 2spd transmission...lol just let me know when because i need to pick up batteries for the remote and a bottle of nitro...lol i think my bottle of nitro costs the same amount as an x-mod....oof....

[ShitOnWheels]

The Xmods are only available at Radio Shack....and they are def. worth the money.

Best x-mas present this year! (Although the air hockey table is a close second) Â*Kare -> Â*:kiss: <- me

- Justin
How many pairs of boxers did you end up getting? ;)

[Tru2Chevy]

I think Tim has a challenge :twisted:

- Justin

[Tru2Chevy]

The Xmods are only available at Radio Shack....and they are def. worth the money.

Best x-mas present this year! (Although the air hockey table is a close second) Kare -> :kiss: <- me

- Justin
How many pairs of boxers did you end up getting? ;)

LOL - only a few....I need to grab my giftcards and go shopping.

- Justin

[NJSPEEDER]

I think Tim has a challenge Â*:twisted:

- Justin

yah, i have to grab teh scale from you and get to work on lightening up teh car :)
i figure i can get at least 10% of teh weight out of ti with in an hour or so :)
i did manage to get teh car to hook better at launch by sliding teh batteries back further. you can actually see teh trailing edge of teh battery holder in teh wheel well now :)
i will have to adjsut that a bit when i start messing with the wheel base on the car. have to see how far i can go and without having to cut teh body for clearance :)

later
tim

[BigAls87Z28]

Can you acid dip the body? :scratch:

[Fasterthanyou]

Drill and small drill bits = light car :D
I'd also look at lithium ion battery upgrads and the "board/amp/piggy back" upgrade kits.
Could be have a destruction durby contest? North/South vs Central... you know, so the non-central have a chance 8)

[NJSPEEDER]

Drill and small drill bits = light car :D
I'd also look at lithium ion battery upgrads and the "board/amp/piggy back" upgrade kits.
Could be have a destruction durby contest? North/South vs Central... you know, so the non-central have a chance 8)

for batteries i was thinking about switching to a single 9volt top mounted and slid back a bit. teh weight is about teh same as the standard batteries, but with 3more volts.
teh wire is also a very light gauge. i see on a few sites they sell 18gauge "upgrade" kits for more than you can buy a small spool of back and red :)
there are going to be some holes drilled and parts/systems removed from the car. i also want to figure out a good way to take all the slop out of the steering, possibly getting it to have 0degrees of toe while i am at it.
i am gonna get another set of wheels and make a set of skinnies for teh front, prolly get that done this weekend.
thanks for starting all this karen :D

later
tim

[Fasterthanyou]

The reason the 9volt won't work is it's current limited. Yes it's got more volts but it can't deliver the amps needed to make power (watts). Look at a batteries mAh rating. The higher that number the faster your car will be. Example; 9volts but only 400mAh vs 6volts with 800mAh; 9*400 = 3600 while 6*800 = 4800
The NiCads have the lowest energy density (they suck) while the NiMH and lithion ion are high (reasons they're in newer electronics). I'd get some NiMH AA's with really high mAh ratings.

[Pat]

i have chrome spray paint if you want a little bling for the wheels (or anything else)

[BigAls87Z28]

Canz you getz some spinnaz fo dat ish?

[NJSPEEDER]

no spinners yet, but there is a place that offers 3 styles of billet aluminum wheels for them. hehe
they also have a bunch of blue anodized aluminum parts avalable :)
i hope they get red anodized stuff soon. everyone knows that is more hp. :roll:

later
tim

[ar0ck]

ttiwwp

[NJSPEEDER]

dremel and drill = -3grams in about an hour :)
i think i am gonan completely disassemble teh car tonight and really go nuts on it.
there is wiring in it for a headlight/tailight kit that i will never get as well as some extra body mounting points for the import bodies that i will never use. hopefully i can get to my goal of taking out at least 10% of teh stock weight(201grams) and still have it look stock from the outside. :)


later
tim