PDA

View Full Version : Street Radial Bracket


NJSPEEDER
02-09-2005, 06:18 PM
General Rules:
All cars must pass an NHRA safety inspection at the track the day of the event.
All vehicles must be muffled. No cut outs permitted to be used.
All vehicles will have a "full" interior. Two front seats(real seats that fit an adult), rear seats may be removed, fully carpeted, complete stock appearing dash, console may be removed but area must be carpeted.
No electronics allowed(electronics= trans brake, two steps, timing boxes, delay boxes...etc.)
Driver is responsible for making sure their dial in time is correct.
All brackets will use .500 tree

Class Specific Rules:
Class is open to any brand and size of traditional street radial tires.
Bias ply and racing type radial tires are prohibited.
Any power adder permitted.
Any engine permitted
Any transmission permitted

later
tim

NJSPEEDER
02-11-2005, 06:07 PM
check in if you are planning to hit up this class!!!!

later
tim

ar0ck
02-11-2005, 09:37 PM
Im in so far.

If I do get some type of stikies by then I can change classes right?

NJSPEEDER
02-12-2005, 10:50 AM
yah, you can join in whatever class is appropriate for you when you get to teh gate.
i just want to get a feel for how many peopel are interested in each class. the last time i worked on an event with a street radial class it had double teh cars of any other class. we pretty much expect the same this time.

later
tim

Fasterthanyou
02-12-2005, 05:34 PM
sounds like me