NJFBOA - Home of New Jersey's Camaros and Firebirds
Page 2 of 2 1 2
Show 25 post(s) from this thread on one page

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   Lounge (http://www.njfboa.org/forums/forumdisplay.php?f=26)
-   -   im new (http://www.njfboa.org/forums/showthread.php?t=31989)

Tru2Chevy 02-10-2008 07:19 PM
Quote:
Originally Posted by bubba428 (Post 418698)
o i don't know the 3 digit designations ...well the best I can tell our new friend has a 2bbl which would be what???

I know Its a G code
There was no factory 2 barrel carb v8 3rd gen.

The G vin code was for an L69 car (hopped up LG4), both used the CC Q-Jet....

- Justin

trashman01 02-10-2008 07:19 PM
the LG4 and the L69 motors were both 4bbls, i beleive E is L69 and H is LG4, F is LB9 and 8 is L98

Tru2Chevy 02-10-2008 07:22 PM
Quote:
Originally Posted by trashman01 (Post 418703)
the LG4 and the L69 motors were both 4bbls, i believe E is L69 and H is LG4, F is LB9 and 8 is L98
Nah, it's G....the others are right though.

- Justin

trashman01 02-10-2008 07:22 PM
wtf is E then i kno there is an e

deadtrend1 02-10-2008 07:23 PM
Quote:
Originally Posted by bubba428 (Post 418698)
...well the best I can tell our new friend has a 2bbl which would be what???
umm ... not stock on a fbody?

who has a 2 barrel?

Tru2Chevy 02-10-2008 07:24 PM
Quote:
Originally Posted by trashman01 (Post 418709)
wtf is E then i kno there is an e
Timmy said that the E was for LO3 (305 TBI) cars starting in '87....

- Justin

bubba428 02-10-2008 07:25 PM
nvm....i didn't look at the pick right...it looked a lot smaller

deadtrend1 02-10-2008 07:25 PM
Quote:
Originally Posted by trashman01 (Post 418709)
wtf is E then i kno there is an e
8 .... L98 ... 350 TPI
F ... LB9 ... 305 TPI
E ....LO3 ... 305 TBI

I dont remember the l69's and the others vin codes

Tru2Chevy 02-10-2008 07:26 PM
Quote:
Originally Posted by deadtrend1 (Post 418711)
umm ... not stock on a fbody?

who has a 2 barrel?
Bubba is referring to the OP, as far as I know.....and from the pic of the engine it looks like a Q-Jet to me....

- Justin

trashman01 02-10-2008 07:27 PM
THATS IT! i forgot my old 88s 305 was a TBI haha. i miss that car

deadtrend1 02-10-2008 07:29 PM
Im too slow on repling. I was still repling to the first page when theres about 10 post in already on the 2nd

bubba428 02-10-2008 07:30 PM
Quote:
Originally Posted by bubba428 (Post 418714)
nvm....i didn't look at the pick right...it looked a lot smaller
Quote:
Originally Posted by Tru2Chevy (Post 418717)
Bubba is referring to the OP, as far as I know.....and from the pic of the engine it looks like a Q-Jet to me....

- Justin
yea I noticed when I looked a 2nd time

Slow 88 02-10-2008 07:34 PM
Quote:
Originally Posted by 86FIREBIRD305 (Post 418624)
i just wanted to meet some people while i'm on here

Hey, I know that bumper cover!!! haha Welcome!

01SS 02-10-2008 08:19 PM
welcome to the club. Im over here in washington twp.

98tadriver 02-10-2008 09:49 PM
welcome! i have a 89 RS with a 305 TBI vin code E lol

trashman01 02-10-2008 11:04 PM
if were doing that, im kyle, i have a 800$ 86 IROC-Z Vin Code F but some1 hacked in a 350TPI lol

maroman88 02-10-2008 11:21 PM
well if were gettin complicated with things, i have an 88 305 TBI VIN E thats been swapped with a VIN F TPI intake setup that came out of a VIN 8 car lol

SteveR 02-11-2008 12:45 AM
Welcome aboard!

bandit88 02-11-2008 09:45 AM
:welcome: to the site
Yey for Third Gens! ;)

86FIREBIRD305 02-11-2008 04:31 PM
my car has a 4bbl and is an "H" code

86FIREBIRD305 02-11-2008 04:35 PM
Quote:
Originally Posted by Slow 88 (Post 418723)
Hey, I know that bumper cover!!! haha Welcome!
yup, it's the one i got from you. thanks again. fits great

86FIREBIRD305 02-11-2008 07:49 PM
quick question, i just got one of those in trunk, leather tonneau covers with none of the clips for the car. what do i need to get? can anyone spare extras? how much?

deadtrend1 02-11-2008 08:11 PM
there are small roundish female-style square hole recievers (best description of them that i can give) that screw into the sides and allow you to "clip" the cover onto the sail panels.

Then there are two holes in the plastic on the trunk deck that the cover clips onto when you entend it.

86FIREBIRD305 02-12-2008 06:00 PM
great, do you know ayone who has them for sale

baddest434 02-13-2008 02:55 PM
what up welcome :mrgreen:


All times are GMT -5. The time now is 03:13 PM.
Page 2 of 2 1 2
Show 25 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.