NJFBOA - Home of New Jersey's Camaros and Firebirds
Page 2 of 2 1 2
Show 25 post(s) from this thread on one page

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   Multimedia (http://www.njfboa.org/forums/forumdisplay.php?f=45)
-   -   picture from atco tue nite (http://www.njfboa.org/forums/showthread.php?t=37358)

NJSPEEDER 09-26-2008 04:47 AM
SAY NO TO TRAINING WHEELS!!! lol j/k

That looks like it was an exciting ride. Did the travel limiters break or just lose adjustment?

-Tim

baddest434 09-26-2008 05:45 AM
Quote:
Originally Posted by NJSPEEDER (Post 491885)
SAY NO TO TRAINING WHEELS!!! lol j/k

That looks like it was an exciting ride. Did the travel limiters break or just lose adjustment?

-Tim
they are only made of aluminum, and they are twisted like a pretzel. i think it probally went bad last week and we didn't think of checking them, we just assumed they were good but as you can see............not!

haha say no to training wheels:rofl: thats what iv'e been saying but i've changed my mind!!

WildBillyT 09-26-2008 08:19 AM
Quote:
Originally Posted by baddest434 (Post 491889)
haha say no to training wheels:rofl: thats what iv'e been saying but i've changed my mind!!
Yeah, some more HP and this can be you:

http://img78.photobucket.com/albums/...eelstand18.jpg

ta350 09-26-2008 09:44 AM
those slicks are doing a great job of teh ground lol

Lt1_8U 09-26-2008 10:10 AM
haha.

how does it feel to be sitting in the car when it does that? i would imagine kinda like a roller coaster when your going up a big hill but only going a lot faster lol

baddest434 09-26-2008 10:11 AM
Quote:
Originally Posted by WildBillyT (Post 491912)
Yeah, some more HP and this can be you:

http://img78.photobucket.com/albums/...eelstand18.jpg

lol i'll pass on being like that. i have seen cars flip right over like that. i can't even afford wheelie bars none the less to repair body panels and crap:shock:

Tru2Chevy 09-26-2008 10:13 AM
Quote:
Originally Posted by baddest434 (Post 491949)
lol i'll pass on being like that. i have seen cars flip right over like that. i can't even afford wheelie bars none the less to repair body panels and crap:shock:
Skip the bars and just fix the limiters :P

- Justin

baddest434 09-26-2008 10:19 AM
Quote:
Originally Posted by Tru2Chevy (Post 491952)
Skip the bars and just fix the limiters :P

- Justin
thats the plan for the rest of this year justin. i need to have custom bars made because i still have the original gas tank not a cell.

SteveR 09-26-2008 10:32 AM
you should just put a lexan floor in like a monster truck and just look through the floor and do a wheelie all the way down the track!

NJ346 09-26-2008 01:57 PM
Quote:
Originally Posted by baddest434 (Post 491955)
thats the plan for the rest of this year justin. i need to have custom bars made because i still have the original gas tank not a cell.
Idk if I would pass on the bars. Check out TTP, I know they are throwing a special on fabrication in their new shop and maybe you can get a deal you can't pass up.

baddest434 09-26-2008 02:17 PM
Quote:
Originally Posted by NJNETSFAN (Post 492014)
Idk if I would pass on the bars. Check out TTP, I know they are throwing a special on fabrication in their new shop and maybe you can get a deal you can't pass up.
thx but i already have a fabricater and TTP SUCKS!!!!!



















































j/k about TTP:rofl: matt, billy and the gang are GOOD GUYS i just had to say that:lol:

BonzoHansen 09-26-2008 06:12 PM
All Hail Bill!

Quote:
Originally Posted by SteveR (Post 491867)
See if you can still submit it for the calender :)
If it passes the tech requirement's hell yeah submit it - I'll make sure it is considered!

baddest434 09-26-2008 06:21 PM
Quote:
Originally Posted by BonzoHansen (Post 492150)
All Hail Bill!

If it passes the tech requirement's hell yeah submit it - I'll make sure it is considered!
i did sumbit it although i know it was past the deadline. but it's not that large of a picture so i don't if it will be any good.
thx bonzo

sweetbmxrider 09-27-2008 01:11 PM
good filler!

NJSPEEDER 09-27-2008 02:42 PM
Quote:
Originally Posted by SteveR (Post 491957)
you should just put a lexan floor in like a monster truck and just look through the floor and do a wheelie all the way down the track!
BEST IDEA EVER!!!! lol

GP99GT 09-27-2008 03:18 PM
http://www.youtube.com/watch?v=tCerfDx1x2I best wheelie ever :lol:

Tru2Chevy 09-27-2008 04:00 PM
Quote:
Originally Posted by baddest434 (Post 492151)
i did sumbit it although i know it was past the deadline. but it's not that large of a picture so i don't if it will be any good.
thx bonzo
Talk to Dave Milcarek and see if he'll give you (or sell you, more likely) the hi-res photo file.

- Justin


All times are GMT -5. The time now is 05:10 AM.
Page 2 of 2 1 2
Show 25 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.