I bring mine up to ~1800 RPM... on last yellow flatfoot it... 1.62 60's

It'll take a few passes to dial in....Try right before the car breaks loose, then try a little less. Then find a happy medium that produces the best times.

When I had my Vig 3600 I just came off idle (or really close to it 1200 or so) and cut 1.61-1.65 60' foots consistently as long as I get the MT ET street Radials heated up properly.

My Pro Torque Converter which is suppose to be a 2800 but it flashes up to 4200 likes to be brake torqued to 2400.

This is all in my heavy 3800 race weight goat with 3.91 gears.

im not that local to atco but i go there quite a bit. lemme know when u go there.

u can run on tues thurs and fri night, sat and sunday as well (test and tune days but costs like 20-25 bucks)

the amount of passes you get depends on what time u arrive, and also if anyone breaks down or oils down the track.

ive gotten as many as 15 passes on a weeknight. id say on average at atco, when nobody breaks down and things go smoothly, expect to see 6-8 if you get into the staging lanes by 5-530.

as far as launching goes, just put it in neutral, rev it to 6k then pop it in drive :nod::lol: