SPID sheet (no MK6, hmmm):
http://www.fquick.com/images/vehicle...jpg?1329393082

Door sticker:
http://www.fquick.com/images/vehicle...jpg?1329392616

IROC springs with 3/4 coil cut in the front and 1/2 coil cut in the back:
http://www.fquick.com/images/vehicle...jpg?1329392600

You can barely see my dog in the background:
http://www.fquick.com/images/vehicle...jpg?1329392641

Aftermarket dual fans on a manual switch:
http://www.fquick.com/images/vehicle...jpg?1329392503

Two f-bodies (my fianace is pissed):
http://www.fquick.com/images/vehicle...jpg?1329392436

I may need to tune the carb, but it smells awesome:
http://www.fquick.com/images/vehicle...jpg?1329392424

It's good when you can see the threads right?
http://www.fquick.com/images/vehicle...jpg?1329392628

Holley Carb #s:
http://www.fquick.com/images/vehicle...jpg?1329395462

Ride height:
http://www.fquick.com/images/vehicle...jpg?1329395451

The Holley part number confirms it's a model 4160 600cfm carb, vaccum secondaries with a metering plate. The bottom number is the build date...

Feb 1970? Damn....

How many bolts are holding the intake down?

I want to say 4 on each side. The doubles in the middle and one for the corners.

I also found the difference in the T5 RPOs:

MK6 - BW 5 spd, 2.95 1st, .74 OD
M39 - BW 5 spd, 2.95 1st, .63 OD

So I got the CAFE trans, even with the G92 package. Not sure if it's a world class though.

afaik, 1988 started world class T5

and those exposed intake manifold threads are due to a pre-87 manifold on centerbolt heads

I still have that mechanical fuel pump...:bertstare:

I was trying to figure that myself.

Best I can tell it's the right intake but with the washers the aluminum cracked. On Vortec pattern heads there's no holes there IIRC.

Matt, you can just re-drill the angle of the inside holes, and you can make the manifold fit. Not the best way, but possible.

Ok thanks. And WBT, there are 6 bolts per side

So my plans for this car are:

-Sort out fuel delivery
-Swap springs with my GTA (Eibach Pro-kit)
-Fix e-brake cables
-Install Hooker shorty headers (2055s) with new wideband O2 kit
-Tune carb using O2 kit
-Race it

And eventually I'd like to put on the biggest set of C5 Z06 wheels and tires I can fit (black with the chrome lip).

I think these are the C5 deep dish, but it would look similar:

http://ls1tech.com/forums/attachment..._3026681_n.jpg

Oh here's one:

http://avatars.ibsrv.net/ibsrv/res/s...ine=1303078203



I'm not a fan of the rivets though...

you can get them without rivets...

http://www.oewheelsllc.com/Wheels_3/...o_4/Z06_wheels

Deep dish would like 10x better

Yea I know, thanks. I was just referring to the ones in the picture.

get the c5 deep dish but without rivets...cuz im getting the matte black ones with rivets for my 87 lol. yahtzee (thirdgen.org) has a sweet car. but quite honestly im really liking yours. i want to put the highrise on mine now

Well the deep dish is probably cheaper too... hmmm

One reason that I really like the C5 Z06 wheels is that they are very light. I would look into getting the same size for all four corners (not staggered like a stock C5 vette) and as wide as I can. Hopefully 295s in the back.

I was looking at these, 17s all the way around is big enough for me:

http://www.ebay.com/itm/17-Rims-Fit-...item5ae4cdc651

What's the widest tire you can fit on a 9.5 inch wheel?

i like them too. plus a good price to boot. im just partial to the c5 deeps' cuz of yahtzee's car, i love the look. itd be nice and probably more cost effective to run the same size all the way around so you can rotate the back to front when you beat the fronts up at the track

That is one benefit. I've also talked to people who have autocrossed third gens and they have said that staggered wheels really affect turn-in radius and even predictability in most cases.

Everytime I come in this thread it makes me want a thirdgen camaro :(. You might have problems with 17's rubbing front renders since its so low, my 84 would rub stock height with gta 16's.

im lowered a good amount and my 17's dont rub up front

I plan to have my Eibach pro-kit on before the rims. My GTA with Koni yellows and Eibach pro-kit:



http://www.fquick.com/images/vehicle...jpg?1319110268



I'm thinking 17 inch vette wheels, 9.5 inches wide with 275/40/R17s all the way around. It will require 2 in adapters on each wheel too.

2 inch? 1.25 up front 1 in the rear