NJFBOA - Home of New Jersey's Camaros and Firebirds

Page 3 of 3

Show 25 post(s) from this thread on one page

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)

- Multimedia (http://www.njfboa.org/forums/forumdisplay.php?f=45)

- - My FBod (http://www.njfboa.org/forums/showthread.php?t=36794)

Fire_Chicken92

09-09-2008 01:44 PM

i got the fan switch, gonna install it tmr

Blacdout96

09-09-2008 07:48 PM

I think you should get a ceiling fan and a cowl hood, itll fit right under there, and you shouldnt have any problems after that :lol:

Jersyboyy

09-09-2008 07:57 PM

Quote:

Originally Posted by Blacdout96 (Post 485214)

I think you should get a ceiling fan and a cowl hood, itll fit right under there, and you shouldnt have any problems after that :lol:

lol

Install that ish and let us know whats good with the overheating. Hopefully that fixes it. Other wise you might be in for a headache.

Fire_Chicken92

09-09-2008 10:33 PM

:rofl:

bandit88

09-10-2008 06:43 AM

Quote:

Originally Posted by Fire_Chicken92 (Post 484854)

ok so im in the RED on my thermometer thing and we open the hood and GUESS WHAT ISNT DOING ITS JOB? The fan is off.. WTG fan, you have one simple job which is to spin, and u have not been doing it. u r fired.

You might just want to check that the fan can also rotate freely...... that's why i had my overheat problem..... :wink:. yours probably won't be that but it is worth checking

and btw its nice to see another chick on here..... and surprisingly you haven't gotten scared away yet! lol

WildBillyT

09-10-2008 10:58 AM

Make sure that you are actually having an overheat problem and that the problem is not the gauge sending unit.

deadtrend1

09-10-2008 11:09 AM

Quote:

Originally Posted by Fire_Chicken92 (Post 485026)

i got the fan switch, gonna install it tmr

Pick up some antifreeze also, cause you need to drain some of it or else you will take a nice bath when you're under there changing it.

HardcoreZ28

09-10-2008 12:51 PM

Quote:

Originally Posted by deadtrend1 (Post 485448)

Pick up some antifreeze also, cause you need to drain some of it or else you will take a nice bath when you're under there changing it.

Nah....I just did mine. Keep the new sensor handy and when you pull the old one plug the hole with your thumb for a few seconds while you grab the new sensor. I lost less than a quart of coolant doing mine.

ShadowHawk

09-12-2008 06:14 PM

Quote:

Originally Posted by Fire_Chicken92 (Post 483572)

=) The really big thing is that it overheats and it stalls, but the stalling I know is almost definitely a vaccuum leak, as for the overheating.... ?

Sorry to break the news to you, but your Fan Ninja died. I'll sell you a dual setup like the pic really cheap(see below).

2 fans, 2 ninjas...when ninja sweat, ninja use fan, fan cool motor, round eye no overheat no mo! PROBLEM SOLVED GRASSHOPPA. :mrgreen:

http://i231.photobucket.com/albums/e...wk355x/fan.gif

/Thread

deadtrend1

09-12-2008 06:18 PM

:laugh:

dude thats hilarious

//<86TA>\\

09-12-2008 06:51 PM

Quote:

Originally Posted by HardcoreZ28 (Post 485466)

thats how i did mine, works well, only lose a cup or so if your fast.

Fire_Chicken92

09-12-2008 08:40 PM

Quote:

Originally Posted by nighthawk355x (Post 486378)

Pshhhh sorry but I hired my friend to sit in there and blow on it.. The comment I left him read

9 Sep 2008 15:17

Ok.. Take a deep breath in (do it its important). Now pucker your lips and blow out as hard as you can. One more time. Ok, good you are hired. I need a fan that does it's job and I think you will fit it pretty well! Don't worry I already called Land Rover and quit for you.. hehe Welcome to my engine bay! I expect you in there first thing tomorrow morning, Hector, don't let me down!

SteveR

09-12-2008 09:19 PM

aw man, and I was goin to get you one of these fans

http://sports.fxinmotion.com/Pictures/crazyfan.jpg

All times are GMT -5. The time now is 06:37 AM.

Page 3 of 3

Show 25 post(s) from this thread on one page