Well, did some highway pulls today with the tuner and found our first hiccup. Fuel pressure was not rising as it should be.
Lousy cell pic but basically Holley is comensating the lack of fuel pressure by dropping AFR super rich. Pretty cool to see. Also, dat boost :mrgreen: Full boost on partial hits. :twisted: https://scontent-lga3-1.xx.fbcdn.net...8b&oe=5EC0EB91 Drop and clean fuel filter Look into rebuild kits for pump and regulator Verify wiring is sound to fuel pump Look into ways to vent the factory tank better Drop wastegate spring to the baby one so we can get a handle on boost Swap in a 160* thermostat cause I do not like the 180* one Progress is fun. |
Swapped fuel filter, thermostat, and fuel regulator diaphragm. Fuel filter def had junk in it but nothing a huge red flag. Check out that mod'd thermostat from unnamedperfshop :bertstare:
https://i.imgur.com/vhhDFRcl.jpg Old cat back is off the car and have the new pipe for the 4in creation https://i.imgur.com/Fim89xcl.jpg And was reading Dave's thread, this is WOT fuel, so internet dyno claims say thats ~1k hp at crank :-P https://i.imgur.com/zBh08PLl.jpg |
Window motor shens day, passenger window finally said no more.
https://i.imgur.com/038USL7l.jpg Draw some mystery X marks the spot and drill away https://i.imgur.com/YMlEdSSl.jpg 1995 era of AC delco parts, laster a long time https://i.imgur.com/rNmoLwJl.jpg While BLS tackled the window motor, I tried to entertain the dream of having a non over heating turbo LT1. Installed a all aluminum, thicker than stock core, new radiator. https://i.imgur.com/IZOnJr8l.jpg https://i.imgur.com/iTwk8erl.jpg https://i.imgur.com/JbjwNDyl.jpg Tried to get my extra HP gainz, but didn't know where to spray this https://i.imgur.com/AlElyh9l.jpg |
Hopefully the last bit of 304ss to be added to the car, with any luck this will get the exhaust out the back of the car. Prob added 100lbs of weight to the car with all the heavy SS :kneeslap:
Dem pie cuts doe! https://i.imgur.com/1c6782al.jpg |
Need a porta-band?:wink:
|
Managed to make some sparks and get some progress made today on the exhaust. Though we forgot to install the baby seat :kneeslap:
https://i.imgur.com/mIAUHBul.jpg https://i.imgur.com/mXgmVtzl.jpg https://i.imgur.com/NqzJO3wl.jpg https://i.imgur.com/pxwQKt5l.jpg All set now for the next part, snaking 4in over the axle. 8-) |
Looks good. How low is it going to hang under the car? Can't be much fun trying to stuff a 4" pipe under there.
|
|
|
|
|
Dash insert should be here friday, so perhaps Saturday I can struggle with making it all work.
|
Love it. Do you get to do a fun background and such with this? Will you be able to order coolant temp sensors directly from the screen too?
|
Ya, custom backgrounds etc. Sadly has no wifi so cannot acess my amazon account to order CTS
|
That is going to be so much easier for me to look at when I take your car to Atco
|
|
Will certainly be trying to make/find a good dash background picture.
|
|
The left and right side are screaming for some fun vinyl.
|
Not sure vinyl would stick to the surface, but if I knew a guy who could cut something fun I would
|
hydrodip it
|
It works! Need to sit and actually setup the dash but happy it works.
https://i.imgur.com/snnWl8Zl.jpg |
Can you play some sweet PS games on it before the race doe? Looks sweet.
|
Quote:
But I don't think it will run a RCA or similar input. |
that is a nice piece!
|
All times are GMT -5. The time now is 03:05 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.