James pulls harder the first half of the track....

- Justin

obviously hes making it up somewhere in the middle of the track...somewhere after the 60's and before probably the 1/8th lol guess thats where he hits the button :lol:

Nah - He (usually) sprays off the line....

- Justin

well we can now deduct that a modded ls1 will outpull a spraying, other mods?, v6 up top :shock:

Well if ya wanna call .01 out 60'ing him. :kneeslap:

Now yes, my previous 1.66 and 1.67 were notably quicker but the car was making less power (torque) than his car (which is also lighter) as well. :)

Would I now be in the 6th spot (identical ET but better 60' and trap speed) or at least tied for 6th on the list or no?

2002 Trans Am WS6 Cam and gears Only, T-56

R/T -.077 (oops)
60Ft Â*1.674
330 Â*4.822
1/8 7.507 @ 91.00
1000 9.850
1/4 11.847 @ 112.38

Had an 11.7 but don't have the timeslip, so this is the best I can prove. No new times yet with the heads and nitrous system

89 Formula went 17.38 @ 80 MPH on 7 cylinders (found a bad plug wire) the day I bought it. I think it will go high 15's now.

jrsfast84....1.38(rear-tires)..9.44@143...th400...White 1984 trans-am

dayum...u drive that monster on the street? what kinda motor/power adder u runnin?

a 1.38 60 is nothing to scoff at, thats for sure. What all is done to that monster?

1991 Z28.......14.1...98mph.....2.1x60ft

I need all the numbers if you have them, and your tranny.

Nice times guys. Keep them coming.

Updated 8)

heres my horrible time...

99 Grand Prix GT

2.29 60', 15.85 @ 85.99 mph, A4 4T65E

Updated 8)

"THE MONSTER"
 

two years ago was the last it seen the street,started out with a 383sbc,AFR heads,hp-950carb.,th350,12 bolt-488's,8" lupo coverterace weight was 3325lbs.,went 10.04@134,w'mufflers,NO POWER ADDERS, for 2004, i build a all new 420"sbc,dart little"m" block,protopline raised runner heads,comp. cam 800lift roller,all the best stuff, made 772hp on dyno,with a hp-950 holley carb., for 2005, 440"sbc,same stuff as above but adding,4.185 bore,4.0 stroke,a dominator carb,moroso vacuum pump, lighter rotating assembly,i'm gonna wing it harder,should make over 800hp. NO POWER ADDERS-DON'T NEED IT. as far as 60fts go, there always on rear tires,never the fronts,when you leave the line at 6000RPMS,REAR bumper touching is a must.i don't like it, but it happens.if anyone has been to Island Dragway on a sunday, the 84' white t/a is the car,i also run the Pro Fastest Street Cars-running in the PRO STOCK class.(all motor class).thats why i'm trying to make that race day in August. but not street legal; it's understandable.if anyone has any ?'s, e-mail me at (newmans.racing@verizon.net)Thanks.

Actually... my 1.7 that day was VERY poor for me.....

I have spun to a 1.58 60 ft before.

I launch at 2900-3,000 rpm's..... stalling the verter..... then as soon as I am WOT.... I am spraying...

4:10's will be here soon... along with hoosier quick time pro's ;)

.130 RT
2.135 60'
5.992 330'
9.221 1/8th
76.12 mph
11.930 990'
14.374et
94.41mph
------------
.194 RT
2.142 60'
6.031 330'
9.279 1/8th
75.17 mph
12.004 990'
14.446et
96.94mph
-------------
.272 RT
2.223 60'
6.109 330'
9.359 1/8th
75.07 mph
12.089 990'
14.539 et
96.37 mph

so i had new bests all around, very happy compared to last time out.

Updated 8)

'91 Lumina 3.1L / A3 (T125C) - hacked airbox

r/t - .593
60' - 2.460
1/8 - 11.111
1/8 - 61.84
1/4 - 17.428
1/4 - 78.17

temp 65, humidity 78, baro 29.46

- Justin

Updated 8)

FINALLY, 8th place by a mere 6/1000ths of a second! :clap: :banana: :laugh: ;)
Please update.
60' - 1.778
1/8th - 7.777@89.94
1/4 - 12.162@112.81
Thank you

yah but i passed your mustang on the non fbody list Â*:redblob: :banana:

Damn GTPs! :evil: :hammer: :bang: :shrug: :banghead: :laugh: :fluffy:
Congrats again dude. :cheers:

Updated 8)