NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   Multimedia (http://www.njfboa.org/forums/forumdisplay.php?f=45)
-   -   MY SS (http://www.njfboa.org/forums/showthread.php?t=58431)

shadowfire 01-03-2012 07:04 PM

MY SS
 
a little clip of my ss

http://www.facebook.com/video/video....90678850962960

1984camaroz28 01-03-2012 07:08 PM

Thats not a 35th Anniversary with an egr intake unless for some reason you took the ls6 intake off.. also whats up with the exhaust??

shadowfire 01-03-2012 07:17 PM

no its a 2000 with a ls6 block and 2800 stall covert. plus cam and a few other things

shadowfire 01-03-2012 07:24 PM

and what do mean by the exhaust

WildBillyT 01-03-2012 07:29 PM

Quote:

Originally Posted by shadowfire (Post 799526)
and what do mean by the exhaust

The 45* out-angle is an atypical setup.

shadowfire 01-03-2012 07:32 PM

when i bought the car it was set up that way, but i kinda like it,....

MyFirstZ 01-03-2012 09:42 PM

What cam you end up installing ?
Numbers?

S.J.SLEEPER 01-04-2012 12:47 AM

Nice car, but that dude is a retard. For one, he doesn't talk like he knows what he's talking about, and two, posts a vid and can't even get the yr/model right...:facepalm:

I also wouldn't post a vid of myself beating on a customers car like that in the end of the video. thats just bad business.

shadowfire 01-04-2012 04:26 PM

Quote:

Originally Posted by MyFirstZ (Post 799572)
What cam you end up installing ?
Numbers?

Here is my cam card:
COMP CAMS

engine:ls6 XR265hr-15
grind number: ls6 XR265Hr-15

intake exhaust

valve adjustment hyd hyd
gross valve lift .558 .563
duration @
.oo6 tappet lift 265 271
vale timing open close
@ .006 int: 18 btdc 68 abdc
exh: 71 bbdc 21 atdc
these specs are for cam installed
@ 115.0 intake center line
intake exhaust
duration @ .050 212 218
lobe lift .3280 .3310
lobe separation 115.0

WayFast84 01-04-2012 07:46 PM

**** them, Seriously took a video powersliding in a customers car? Did they do the trans? Isn't that like a redone stock converter? What camshaft was in it before?

1994lt1 01-05-2012 11:58 AM

How is it a 35th SS if its a 2000? :-?

shadowfire 01-05-2012 04:12 PM

its a 2000 ss the guy .. was looking at my third shirt emblems and i guess he thought it was a 35th

1994lt1 01-05-2012 08:40 PM

Quote:

Originally Posted by shadowfire (Post 800390)
its a 2000 ss the guy .. was looking at my third shirt emblems and i guess he thought it was a 35th

Ahhh ok. Sense=you making

MonmouthCtyAntz 01-06-2012 08:19 AM

Yank that EGR out....

usp55 01-06-2012 11:06 AM

Quote:

Originally Posted by S.J.SLEEPER (Post 799591)
I also wouldn't post a vid of myself beating on a customers car like that in the end of the video. thats just bad business.

+1

and if that was my car I'd be furious seeing the end of that vid.

shadowfire 01-06-2012 04:35 PM

as for the end of the clip its no big deal, it was with old tires on, and camaros are made to take off...

S.J.SLEEPER 01-06-2012 04:56 PM

Quote:

Originally Posted by shadowfire (Post 800985)
as for the end of the clip its no big deal, it was with old tires on, and camaros are made to take off...

I know its no big deal to certain people, bad tires , whatnot, and I am sure you are harder on it than he was..

Its the point,priciple, respect for others property and business ethics that I and others don't approve of.
I've beaten the ever livin sh&t out of my cars in the past, but if I seen that dude do that to my car Id be f'n livid over it.

shadowfire 01-06-2012 05:03 PM

ok np ,,, all i want to do is have a wicked evil street car,, i trying the best i can im not super rich but i dont mind putting money into it,,, slowly but surely i will get this car set up,, after that i hope to get a 2000 or 2001 ws6 ....

band77one 01-08-2012 08:06 AM

nice car, but now i know never use that shop since they beat on customer cars.

shadowfire 01-08-2012 01:29 PM

your wrong ,, that "shop" does some of the best work out thier, they are pricey at that is maybe the only reason to stay away from them... now i know that your not allowed to promote ppl shops ... so i wont,, but you can take a look for yourself

coolmanvette75 01-08-2012 01:54 PM

Did they recommend that cam or did you? How "big" did they say that cam was. I have a theory but need to know those answers to prove it...

S.J.SLEEPER 01-08-2012 02:36 PM

Quote:

Originally Posted by coolmanvette75 (Post 801413)
Did they recommend that cam or did you? How "big" did they say that cam was. I have a theory but need to know those answers to prove it...

For the reading impaired... :hammer:

Quote:

Originally Posted by shadowfire (Post 799835)
Here is my cam card:
COMP CAMS

engine:ls6 XR265hr-15
grind number: ls6 XR265Hr-15

intake exhaust

valve adjustment hyd hyd
gross valve lift .558 .563
duration @
.oo6 tappet lift 265 271
vale timing open close
@ .006 int: 18 btdc 68 abdc
exh: 71 bbdc 21 atdc
these specs are for cam installed
@ 115.0 intake center line
intake exhaust
duration @ .050 212 218
lobe lift .3280 .3310
lobe separation 115.0


shadowfire 01-08-2012 07:01 PM

Quote:

Originally Posted by coolmanvette75 (Post 801413)
Did they recommend that cam or did you? How "big" did they say that cam was. I have a theory but need to know those answers to prove it...

they did

shadowfire 01-08-2012 07:08 PM

what do you think?

Tru2Chevy 01-08-2012 07:12 PM

It's a pretty small cam.

212 / 218 .558 / .563 @ 115

- Justin


All times are GMT -5. The time now is 12:33 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.