Intake manifold mods
3 Attachment(s)
I wanted to upgrade from my 65mm throttle body to my 75mm, LS1 throttle body on my intake manifold but realized, I had a bottle neck in the intake. The intake has a goose neck after the throttle body and has a circumference of only 68mm. So I decided to remove both issues and install a 3 1/2'' pipe to free things up. Here are some pics of the stock manifold before surgery.
|
3 Attachment(s)
Some pics after surgery.
|
2 Attachment(s)
Removed parts from intake.
|
2 Attachment(s)
Test fit for the 3 1/2'' pipe.
|
2 Attachment(s)
Comparison pics of the 65mm and 75mm throttle bodies and the adapter plate for the 75mm throttle body.
|
3 Attachment(s)
Finished welding adapter plate to pipe and pipe to plenum. Ready to install.
|
3 Attachment(s)
Intake is installed and car is running. I had some idling issues at first but a little tuning and all is good. I have some more tuning to do now before going wot.
|
Wow, looks awesome!
|
Agreed, came out good
|
whew, nice job. looks very nice
|
Thanks for the compliments. I can't take credit for the welding though, a good friend of mine, who is a welder by trade, helped me out.
|
That is the boldest and most beautiful thing i've seen done here! Awesome.
|
Quote:
|
All times are GMT -5. The time now is 01:09 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.