NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   Engine / Power / Tuning (http://www.njfboa.org/forums/forumdisplay.php?f=31)
-   -   P0172, P0175 (http://www.njfboa.org/forums/showthread.php?t=66634)

mab6680 12-20-2015 04:14 PM

P0172, P0175
 
97 stock Z28, driving home today my car started idling REAL rough. CEL came on shortly after, when i got home i ran the codes and P0172 and P0175 both banks running rich. the car will not start unless the pedal is floored and even then it takes a few seconds longer to start plus you can smell raw gas. fpr not leaking fuel, LT fuel trims are staying at 0 and the ST trims are going as high as -37 on both banks, also the temp sensor is reading fine. evap, egr, and rear o2 have all been removed and tuned out for a few years now. anyone have any clues as to where to look next?

FlyingDutchman 12-20-2015 04:47 PM

I would start by testing the fuel pressure and O2 readings.

I had a similar problem running extremely rich, turned out front O2s were toasted and pcm saw very lean exhaust

chknhwk01 02-09-2016 05:14 PM

badd 02 sensors
 
I would replace both 02,

sweetbmxrider 02-09-2016 05:28 PM

shazammmm

ThoR294 02-09-2016 05:29 PM

Could be bad o2s. Try unplugging a front one see if it helps. Does the car run OK on a cold start?

6spdg37s 02-09-2016 06:40 PM

pull a plug and read it ? this is an old post tho hope you figured it out by now

sweetbmxrider 02-09-2016 07:21 PM

Sounds like the o2's are saying pull fuel? I would look elsewhere.

ThoR294 02-09-2016 08:01 PM

god damnit chickenhawk bumping 2 month old posts lol

LTb1ow 02-10-2016 06:30 AM

Quote:

Originally Posted by ThoR294 (Post 924225)
god damnit chickenhawk bumping 2 month old posts lol

bukk bukk warriorzzz

chknhwk01 02-10-2016 10:56 AM

0r this?????
 
you mite have too move your 02 sensors, back a little,

sweetbmxrider 02-10-2016 10:59 AM

Quote:

Originally Posted by chknhwk01 (Post 924252)
you mite have too move your 02 sensors, back a little,

Like unscrew them back a little? About how far?

chknhwk01 02-10-2016 09:14 PM

02 sensors
 
move them back about 7to10 ins... try that that mite work??

sweetbmxrider 02-11-2016 06:22 AM

buk buk playazzzz


All times are GMT -5. The time now is 06:51 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.