Interior Dash Wrap (for passenger aibag cover)
 

My airbags deployed a few years ago, and it mangled the passenger air bag...

http://i.imgur.com/Kl7a7Sr.jpg?1

You think wrapping just that piece will look ok? So I don't have to replace the whole damn dash....

Wrapping it may effect the way it deploys in the future

I thought about that also, but I am not sure if I am going to fully fix the airbag system. If I was, I would get a new dash. I figured for now so my car doesn't look like ass lol

Just so you know, if the air bag system isn't "fully fixed" it will be disabled. You can't just have a driver air bag etc. If you just want it to look nice, sure wrap away.

I know that silly :D I bought a kit from a 98 trans am and some sensors are different. so I just need to find a set from a 96 or verify part #s. I have the d/s airbag and passenger airbag and teh front sensor, but console sensor is different :|

I'd be wary of mixing things especially between the generations. It may just be the brain that is different but I haven't really looked into it.

they totally changed over the years. early ones had a bunch of sensors based on what i read, vs the 99Z28 i parted that only had a single unit under the console.

This is the one I have sitting around that I pulled from my 96. Part number: 16229791

http://i140.photobucket.com/albums/r...pse19e6a91.jpg

same part # as mine.... how much you want for it??? any other airbag parts from your car? Im not sure what other sensors there are... I haven't looked at it in a while

I have no luck finding a dash... any tips on fixing this cover so it doesn't look like @$$? I am unsure if I will ever get the airbag system to 100%... so at this point i just want it to look good

I may have that airbag computer too, If i get by my moms house ill check for you. I ripped mine out so I dont ever have to find a dash, lol.