NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   Appearance (http://www.njfboa.org/forums/forumdisplay.php?f=29)
-   -   Price for Fbody wrap (http://www.njfboa.org/forums/showthread.php?t=67406)

MDSheds_SS 12-11-2016 08:11 PM

Price for Fbody wrap
 
Most likely going to get my car repainted or might have it wrapped. If I paint it I'll keep the same color but if it gets wrapped I'm gonna do gloss black. Anyone know the going rates for wraps? We have a company in Woodbridge that does high end cars daily, just haven't stopped in yet.

6spdg37s 12-11-2016 08:45 PM

joes gettin his pickup wrapped i think about 2k so prob less to cover a car much smaller than a silverado

NJ Torque 12-12-2016 09:58 AM

Quote:

Originally Posted by 6spdg37s (Post 932505)
joes gettin his pickup wrapped i think about 2k so prob less to cover a car much smaller than a silverado


Then again, a Silverado has easier panels to cover then a Camaro.

ar0ck 12-14-2016 12:09 PM

Food for thought, if you have any imperfections in the paint, like chips or faded areas it will show with vinyl. Keep us posted on how it goes, I'm curious.

MDSheds_SS 12-14-2016 05:04 PM

Quote:

Originally Posted by ar0ck (Post 932607)
Food for thought, if you have any imperfections in the paint, like chips or faded areas it will show with vinyl. Keep us posted on how it goes, I'm curious.

I have more imperfections in the paint, then nice paint lol. That's why I want to get it wrapped or painted. What I'm really worried about is the rubber from the tires after a burn out on the lower quarter. Not sure how i can take that off if it was wrapped. Almost think a scuff and re-spray is gonna be the easier way to go. Pewter door jams and black vinyl might be to getto for me. ( I would wrap it black)

LTb1ow 12-16-2016 10:47 AM

Quote:

Originally Posted by ar0ck (Post 932607)
Food for thought, if you have any imperfections in the paint, like chips or faded areas it will show with vinyl. Keep us posted on how it goes, I'm curious.

Its not as bad as you would think, pending thickness of vinyl.

We did my room in vinyl and its all sorts of ****ed up below the wrap. Does not look bad at all IMO wrapped. Is it perfect? No. But its much better than before.

As far as the quarters with burnouts, make that area a smaller piece and allow it to be sacrificial. You may end up with a couple odd lines with the pieces fit but I'm sure if you did it slowly you can minimize that.

sweetbmxrider 12-16-2016 11:02 AM

Quote:

Originally Posted by LTb1ow (Post 932685)
Its not as bad as you would think, pending thickness of vinyl.

We did my room in vinyl and its all sorts of ****ed up below the wrap. Does not look bad at all IMO wrapped. Is it perfect? No. But its much better than before.

As far as the quarters with burnouts, make that area a smaller piece and allow it to be sacrificial. You may end up with a couple odd lines with the pieces fit but I'm sure if you did it slowly you can minimize that.

Pics of room?

WildBillyT 12-16-2016 11:08 AM

Quote:

Originally Posted by LTb1ow (Post 932685)
Its not as bad as you would think, pending thickness of vinyl.

We did my room in vinyl and its all sorts of ****ed up below the wrap. Does not look bad at all IMO wrapped. Is it perfect? No. But its much better than before.

As far as the quarters with burnouts, make that area a smaller piece and allow it to be sacrificial. You may end up with a couple odd lines with the pieces fit but I'm sure if you did it slowly you can minimize that.

Hard core, man

unstable bob gable 12-16-2016 01:23 PM

I'd like to wrap my room. Wonder if they have a wrap with images of Barney on it? :D

BonzoHansen 12-16-2016 01:31 PM

Quote:

Originally Posted by unstable bob gable (Post 932691)
I'd like to wrap my room. Wonder if they have a wrap with images of Barney on it? :D

https://s-media-cache-ak0.pinimg.com...89e72c57f5.jpg

Jersey Mike 12-16-2016 01:39 PM

Quote:

Originally Posted by unstable bob gable (Post 932691)
I'd like to wrap my room. Wonder if they have a wrap with images of Barney on it? :D

If you're serious, I can get you whatever you need (provided you supply a high-enough resolution photo). We can cover that bitch in all the Affliction graphics, skulls & tophats you want...

unstable bob gable 12-16-2016 02:41 PM

Quote:

Originally Posted by Jersey Mike (Post 932695)
If you're serious, I can get you whatever you need (provided you supply a high-enough resolution photo). We can cover that bitch in all the Affliction graphics, skulls & tophats you want...

I was just joshing but that is pretty dayum impressive

6spdg37s 12-16-2016 05:45 PM

Quote:

Originally Posted by MDSheds_SS (Post 932618)
I have more imperfections in the paint, then nice paint lol. That's why I want to get it wrapped or painted. What I'm really worried about is the rubber from the tires after a burn out on the lower quarter. Not sure how i can take that off if it was wrapped. Almost think a scuff and re-spray is gonna be the easier way to go. Pewter door jams and black vinyl might be to getto for me. ( I would wrap it black)

u could tape it but then again I got my car detailed and then as I am doing my burnout at the track last time im like FK i should of taped the damn back bumper haha

LS1ow 12-17-2016 03:52 PM

Didn't Jake have his car wrapped flat black?

phantoms 12-19-2016 04:56 PM

Prices usually go just like paint. You get what you pay for. The more attention to detail when installing will help the wrap last longer. I'd say 2k+ depending what you want to spend. I wrapped my trans am with my friend and it cost around 500 for materials.

Jersey Mike 12-19-2016 07:29 PM

Quote:

Originally Posted by phantoms (Post 932783)
Prices usually go just like paint. You get what you pay for. The more attention to detail when installing will help the wrap last longer. I'd say 2k+ depending what you want to spend. I wrapped my trans am with my friend and it cost around 500 for materials.

Any pics?

LS1ow 12-19-2016 08:09 PM

Also, that new kid that won COTM Brian is wrapping his car over winter I believe

BonzoHansen 12-19-2016 08:49 PM

Bls wraps cars now?

LS1ow 12-19-2016 09:10 PM

Quote:

Originally Posted by BonzoHansen (Post 932796)
Bls wraps cars now?

other Brian with the black LT1 that won COTM:nick:

KirkEvil 12-22-2016 11:12 PM

Quality material will run $600-$800 depending on design to do an fbody. Probably more if you screw up.

Front bumper
Hood
Pass Fender
Driver Fender
Pass Door
Driver door
Pass rocker and Quarter
Driver rocker and Quarter
Roof
Sail panel
Hatch
Spoiler
Berger panel
Rear bumper
Plus Misc Mirrors, handles, jams

I would estimate each body piece as a job for ~$100 each, so about $1500 total labor on top of the material cost

phantoms 12-25-2016 07:18 PM

3 Attachment(s)
Quote:

Originally Posted by Jersey Mike (Post 932787)
Any pics?

Here's a few.

phantoms 12-25-2016 07:20 PM

3 Attachment(s)
Quote:

Originally Posted by Jersey Mike (Post 932787)
Any pics?

Few more

phantoms 12-25-2016 07:24 PM

3 Attachment(s)
Quote:

Originally Posted by Jersey Mike (Post 932787)
Any pics?

The more complicated stuff. The only thing not wrapped is the underside of the spoiler. The top and the deck lid are wrapped we removed the spoiler for that. The underside we figured wasnt worth the trouble

ar0ck 12-26-2016 10:04 AM

Wow I'm blown away that looks great!

phantoms 12-27-2016 07:04 PM

Thanks rock


All times are GMT -5. The time now is 09:49 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.