Floor Pans
 

Anyone know where i can get floor pans for a good price? I went out to my car yesterday n cleaned it up a lil bit since the weather is starting to get a lil nicer in my area, and i took a look under the car. The floor pan on the drivers side has 3 small holes developing on the drivers side. I would just patch them but theyve been patched b4 by my father who had originally built the car. So im just goin to get new ones. ............ Thanx in advance allen

Year one should have anything you need.

http://www.yearone.com/

What year car are you referring to?

If it's the thirdgen in your sig you can also try Hawks...they are cheaper than Year One for the same parts. However if they are small holes I would suggest patching them again instead of disturbing the whole floor pan and possibly the geometry on a unibody car.

its an 82 third gen

How bad are the holes? If you can avoid removing the pan, that's the best fix. Just try patching the area if it's weak. Removing floor pans will affect the strength of the car so it needs to be put up properly and a lot of time guys will weld in reinforcing bars to help hold the body from flexing.

I agree with JL8Jeff...
 

Fix the holes first...if all else fails, then do the pan.

SteveO