NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   Member's Projects (http://www.njfboa.org/forums/forumdisplay.php?f=72)
-   -   Not this again. (http://www.njfboa.org/forums/showthread.php?t=67204)

LS1ow 09-16-2016 01:46 PM

Not this again.
 
3 Attachment(s)
I did a thing.

I passed on buying this car a while back when it was at my buddys shop. Car was set up with a T-56 and procharger. The driveline was removed and swapped into a 2nd get T/a from what i understand. The car was bought before i could make room for it or anything so whatever.

Fast forward 4 months to last week, the car is for sale again. A quick ride to Yonkers, NY to make sure everything is good to go bout the car and after some :bertstare::bertstare::bertstare: the car is in my driveway.

1999 NBM w. Tan Interior Z28
LS1
T56

Car Has:
UMI 3 Point SFC
UMI LCAs
UMI LCA Relocation Brackets
UMI Adjustable TQ Arm
UMI Adjustable Panhard Bar
"Built Rear"

This "Built" rear is a 10 bolt. So far all i can tell about it is that it has a TA Girdle cover thing, and Extended wheel studs.

Not really sure wear i plan on heading with this. Auto or Stick is still up in the air with auto being in the lead by a significant amount. Also want to swap out the Tan gut... and the ZR1 Wheels.

Most likely its going to end up being a "Cam Only" build but who knows.

Theres some other issues that need to be addressed before that. Such as the lack of gas tank.


But anyway...

WildBillyT 09-16-2016 01:51 PM

Welcome back d00d

:D

NJ Torque 09-16-2016 01:57 PM

Nice... NBM is the only color I like a tan gut on.

sweetbmxrider 09-16-2016 01:58 PM

The more important question.....is there a 4bt in that bread truck????

Jersey Mike 09-16-2016 02:14 PM

Not sure on budget, but I have the steel tank out of the '95 still if you want it.

Blackbirdws6 09-16-2016 02:20 PM

Congrats on the new money pit. You need some new lights ;).

LS1ow 09-16-2016 02:26 PM

Quote:

Originally Posted by NJ Torque (Post 929589)
Nice... NBM is the only color I like a tan gut on.

I dont mind the seats all that much... the carpet is what kills me. I have a black carpet from my 01 Z, so maybe ill run the black carpet with the tan seats and see how it looks.

Quote:

Originally Posted by sweetbmxrider (Post 929590)
The more important question.....is there a 4bt in that bread truck????


no... BUT... it is for sale. come n git it

Quote:

Originally Posted by Jersey Mike (Post 929592)
Not sure on budget, but I have the steel tank out of the '95 still if you want it.

Well the car had a fuel cell, so idk what im gunna do about that. But id like to steer away from the steel tank.

Jersey Mike 09-16-2016 02:52 PM

Yeah I opted for the same. Nonetheless it's free for you, should you want to relive your LT1 days.

Blackbirdws6 09-16-2016 05:05 PM

I think black carpet with tan seats will look sad.

Jersey Mike 09-16-2016 07:04 PM

3 Attachment(s)
Disagree. If done right, you could definitely pull it off. See attached.

Blackbirdws6 09-16-2016 07:43 PM

Not a fan, especially with the NBM exterior. Too many colors.

madness410 09-16-2016 08:23 PM

sweet ride

LS1ow 09-17-2016 07:52 AM

Quote:

Originally Posted by Blackbirdws6 (Post 929608)
Not a fan, especially with the NBM exterior. Too many colors.

You realize whos car this is right ?

But seriously, after sitting in the car for a minute yesterday im not sure about the black on tan.

this is what i was imagining it would look like..

https://photos-2.carwow.co.uk/blog/1600/a8-tan.jpg


and the Fbody tan is much much lighter than i thought. Its almost like a pale grey.

Jersey Mike 09-17-2016 08:13 AM

Peanut butter.

The issue I'd see is you'd then have a trio of colors between your carpet, seats, and panels.

MDSheds_SS 09-17-2016 08:24 AM

Looks like an EZ Lip on the front like my car. Adds 5 RWHP. I measured on my ass dyno. Good luck with the build.

LS1ow 09-17-2016 09:05 AM

Quote:

Originally Posted by Jersey Mike (Post 929614)
Peanut butter.

The issue I'd see is you'd then have a trio of colors between your carpet, seats, and panels.

Panels would be swapped out for my black ones if anything.

Quote:

Originally Posted by MDSheds_SS (Post 929615)
Looks like an EZ Lip on the front like my car. Adds 5 RWHP. I measured on my ass dyno. Good luck with the build.

thanks !

LS1ow 09-20-2016 09:57 AM

Scored a LS6 intake and P&P TB last night for a steal.

1 piece down, many more to go

NJ Torque 09-20-2016 11:36 AM

I has a procharger kit that'll mount to the brackets in your front bumper there friend...

PolarBear 09-20-2016 05:57 PM

I have some 241 heads if you're interested, probably some other stuff too

LS1ow 09-21-2016 06:38 AM

Quote:

Originally Posted by NJ Torque (Post 929725)
I has a procharger kit that'll mount to the brackets in your front bumper there friend...

I wish, but i cant budge that right now. and i want to stick to all motor with this.

Quote:

Originally Posted by PolarBear (Post 929732)
I have some 241 heads if you're interested, probably some other stuff too


Heads ive already sourced, but let me know if youve got some other stuff. Im going to post up a list of things shortly

LS1ow 09-21-2016 06:55 AM

List of shenz
 
Ok so i took about 10 mins to come up with a quick list of the things i need to get for the car, im sure theres stuff missing, so if anyone thinks of anything, post it up !

Heads(already sourced, just need to pick up:nick:)
Cam(Buying New)
Valve Spring Kit(New)
Oil Pump(New)
LS1 Shortblock(possibly found, but still looking)
Trans (4L60e)
Converter (New)
Lifters (already ordered from GM)
Timing Chain (already ordered from GM)
TQ Arm for Auto
Trans X Member for Auto
Coolant Hoses
MAF
Battery
Gas Tank
Fuel Pump (new)
Injectors
Fuel Rails
Hardware for engine assembly(ARP new)
Automatic Pedal Assembly(:bertstare:)
Plastic thingy that PCM mounts into
PCM(Sourced, just need to get)
Harness(Sourced, just need to get)
Fluids
Head Gaskets
Other Misc Gaskets


anything else ????

Jersey Mike 09-21-2016 07:29 AM

You're really not going to buy a new battery? If not, I have an old Interstate in the shed that you can have. Take it to work & test it.

LS1ow 09-21-2016 07:59 AM

Quote:

Originally Posted by Jersey Mike (Post 929755)
You're really not going to buy a new battery? If not, I have an old Interstate in the shed that you can have. Take it to work & test it.

I figured i didnt have to state a new battery.

Do you have any coolant and used oil i can test out too mike ? :kneeslap:

Blackbirdws6 09-21-2016 07:59 AM

Missing decals and some form of FI.

MDSheds_SS 09-21-2016 10:22 AM

If it's a t56 car you will need a dash harness from n auto car as well as some type of plate to cover the hole from the t56 shifter. Only the rear 2 bolts will line up and the front of the shifter will hang down into the hole.


All times are GMT -5. The time now is 06:15 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.