Lots for sale: drag radials, tail-lights, 3.55 ring and pinion, TPI electronics, etc
 

Selling off a bunch of stuff, if anyone wants more info on anything, just feel free to ask.

Prices do NOT include shipping. I am located in 07847 which is Roxbury NJ, so if you are local, might want to save on shipping. I am NOT going to ship the wheels/tires, those need to be picked up directly.
-Also, my old exhaust (headers, y-pipe, electric cutout, and hooker 3" cat-back) was going to all be for sale, but my cousin already bought it from me.

OEM 1987 rear IROC-Z wheels which are original to my car and were repainted and clear coated several years ago. The tires are the Mickey Thompson ET Street SS Drag radial tires that I used the past two years at the dragstrip AND on the street, even in the rain...and they were just fine in the rain. I made dozens of passes on them and they never failed me. They are 255/50/16 and have sufficient tread/use left on them. These tires cut several 1.4x sixty foot launches on nitrous and they only need a short 5-6 second burnout while at 19-22 psi and they will hook great. If you are looking for grip and traction, this is what you should buy. They sell for $255 each without a wheel. I am selling the pair of these (two wheels, two tires, mounted and balanced) for $250 total. Will not ship these.

https://live.staticflickr.com/65535/...b57938eb_z.jpg

https://live.staticflickr.com/65535/...fb77bc99_z.jpg

https://live.staticflickr.com/65535/...75cd4d89_z.jpg




NOS wet-nitrous platge for TPI intakes. Bolts right onto a TPI intake. I used this for about 6 years and it worked great but I am not TPI anymore. Sim
$75
https://live.staticflickr.com/65535/...722726fd_z.jpg





Some type of aluminum carburetor spacer. I think its for a mopar setup? I can measure it if someone wants me to.
$15
https://live.staticflickr.com/65535/...ed238093_z.jpg



Drake billet-aluminum hood pins. Bought these two years ago, and never installed them, just opened the package. I think they retail for around $100. I will take
$60
https://live.staticflickr.com/65535/...d402c6b4_z.jpg

https://live.staticflickr.com/65535/...2a324a6f_z.jpg

https://live.staticflickr.com/65535/...1261e9b3_z.jpg

short and long center caps for the Jegs SSR wheels.
$5 each or 3 for $10
https://live.staticflickr.com/65535/...d36b2874_z.jpg


Champion radiator cap (never used) but will fit oem 3rd gen radiators.
$10
https://live.staticflickr.com/65535/...eaf5e4ea_z.jpg

US Gears 3.55 ratio ring and pinion set. I used this for 2 years in the car with my moser 12 bolt rear. They never gave me a problem, but for racing I went to a 3.91 gear ratio so these 3.55s came out. Hardly any wear. this is the link with the specs and they sell for $300 new
I am selling them for $120. (You will need to buy the shim/bearing kit)


https://live.staticflickr.com/65535/...28251a5c_z.jpg

https://live.staticflickr.com/65535/...a00df2e5_z.jpg



Modified OEM camaro IROC-Z tail lights. These were the original ones on my car. I peeled them apart about 10 years ago and did the red tail-light mod with the translucent candy red paint inside the lens to eliminate the orange turn-signal color. This is 100% legal in New Jersey. . They are NOT painted on the outside of the lens, so with some plastic polish and elbow grease, you can get them to shine. I had installed a battery kill-switch into the separate black plastic piece on the passenger side, so there are some drill holes from that, but I know you can replace the black plastic at a cheap price.
$150 for both lights as seen

https://live.staticflickr.com/65535/...d1de0a83_z.jpg


https://live.staticflickr.com/65535/...32679402_z.jpg


https://live.staticflickr.com/65535/...7252f864_z.jpg






OEM TPI fuel pressure regulator complete
$20
https://live.staticflickr.com/65535/...339f42bf_z.jpg


OEM camaro lug nuts, keyed lugs (with key), and some oem lug studs:
$20 for all of it
https://live.staticflickr.com/65535/...5433d6c7_z.jpg


https://live.staticflickr.com/65535/...d91d1f4d_z.jpg




Those little plastic dress covers that go under the oem style seats to hide the metal seat brackets:
$10 for all of em

https://live.staticflickr.com/65535/...d2467774_z.jpg


I forget what this was for, some type of vacuum distribution block for TPI?
$5

https://live.staticflickr.com/65535/...bc7cffe5_z.jpg

TPI style distributor with the electronic plugs in the back of the cap:
$50

https://live.staticflickr.com/65535/...450c8395_z.jpg


The corner spoiler "wings" for oem style wedge spoiler on some 3rd gen camaros:
$30 for the pair


https://live.staticflickr.com/65535/...467a7a11_z.jpg

https://live.staticflickr.com/65535/...f941608b_z.jpg





AC delco re-man TPI ecu. This powered my car up until the day I pulled the engine out for the new engine, so it is 100% good
$50

https://live.staticflickr.com/65535/...1d7af105_z.jpg

https://live.staticflickr.com/65535/...bb31e8b4_z.jpg




Relay assembly from my 1987 iroc. ECU connector on teh side and then the normal relays (MAF, MAF burnoff, and I think Fuel pump?)
$30


https://live.staticflickr.com/65535/...72357c2a_z.jpg



Working Mass Air Flow sensor and the rubber housing for TPI. (the pre-sensor screen is in place but the post-sensor screen I had removed)
$50


https://live.staticflickr.com/65535/...88c15829_z.jpg


https://live.staticflickr.com/65535/...88464bd7_z.jpg




95% of the complete OEM 1987 TPI electronic harness. Almost everything is there like all injector connections, battery ring terminals, starter stuff, relays, ecm plugs, distributor stuff, etc) I think i only removed the Torque converter lock-up connector and wires, and the oil pressure spade terminal and coolant temp sender spade connector. If someone has a bunch of broken connectors, or just wants these oem connectors, this is a good chance to get some without paying $10 per connector on places like year-one. Selling this as is for $75, and I would hate to bring it to the recycle center even though i could probably get good money for the copper wire. Would hope someone could make better use of it. I hand-labeled almost every connector as I removed it from the car 2 years ago so that is helpful.
$75

https://live.staticflickr.com/65535/...39fcab99_z.jpg

https://live.staticflickr.com/65535/...781aa0d1_z.jpg


https://live.staticflickr.com/65535/...00c0098a_z.jpg

https://live.staticflickr.com/65535/...5ea3b144_z.jpg



OEM style steering wheel, just needs some cleaning up:
$15


https://live.staticflickr.com/65535/...f2ced061_z.jpg



Alternator bracket (pass side) and power steering pump bracket (drivers side)
$10 total:

https://live.staticflickr.com/65535/...174b118f_z.jpg

OEM front drivers side and front passenger side seat belts and belt receiver setups:

$40 for the all of it

https://live.staticflickr.com/65535/...5e4d374c_z.jpg






oem thirdgen camaro shifter and knob.
$15

https://live.staticflickr.com/65535/...5dc5f9cf_z.jpg

https://live.staticflickr.com/65535/...e72bd0c8_z.jpg



Front fender inner brackets:
$10 for all 3

https://live.staticflickr.com/65535/...7d7d2a72_z.jpg


3" wide kevlar Top fuel nitro engine supercharger belt:
$25

https://live.staticflickr.com/65535/...bd6eb185_z.jpg


those foam triangle pieces that cover the upper rear shock mounts under the carpeting.
$5 for both


https://live.staticflickr.com/65535/...ed5ed573_z.jpg




OEM strut tower mounts with plastic caps. bearings are still in good shape too
$40 for the pair:

https://live.staticflickr.com/65535/...55038859_z.jpg



The whole oem steering linkage setup from my car. inner and outer tie rods, center link, pitman/idler arm?
$25

https://live.staticflickr.com/65535/...e992632e_z.jpg



SBC style (normal flow) water pump:
$20

https://live.staticflickr.com/65535/...41e11ffa_z.jpg


Modified combination valve (prop-valve to some people) :
$20

https://live.staticflickr.com/65535/...2e9f6bfe_z.jpg

Sold:
- TPI ECM computer
- TPI relay configuration
- entire TPI harness
- Seat Belts and receivers



everything else is still for sale

bump



and
MAF sensor sold
Vacuum block sold


sale pending on tail-lights


Will be bringing some of the stuff to Island Dragway next weekend for their spring swap meet since my buddies got a vendor space and have extra room for me to put some stuff out. so if interested in anything, you can find me at swap meet.

Price for the seat track covers shipped to 08037?

I think I can fit them in a small box, instead of trusting a bubble-wrap envelope. It will probably cost about $5 or so. Would $15 grand total be ok? feel free to Pm me, and I will send you my paypal info. Also, the only ones I have are those 6 covers, I think there should have been 8 in total, but two were probably broken or lost a long time ago.

this is the final thread bump before I let it close out.

sprayed, if you want those plastics, just feel free to send me a private message and we will get them shipped to you.


Items that are sold and no longer available:
- seat belts
- TPI harness
- TPI ECU
- TPI relay block
- vacuum block
- MAF sensor and snorkel
- nitrous plate
- rear body corner spoiler pieces
- both taillights


Still for sale:
- everything else! Hoping someone buys the wheels/drag radials, they work awesome!