|
Tastefull Interior Modifications
Since this Spring weather refuses to co-operate and my car is stored outside, I have a number of on going projects that I'm working on from the comforts of my own home. I figured I could keep you guys posted on some of my mini projects.
I recently scored a good ebony leather interior out of a 2002 Formula (Huge thanks to V!) and the end game is to remove that fantastic 90's Light Grey trim that currently resides in the car. I was originally inspired for this interior build when I first saw the Mercedes-Benz C63 AMG interior a few years ago, I thought it was the perfect balance of black, cloth, leather, silver trim and carbon fiber. Unfortunately I'm not filthy stinking rich and can't really afford real carbon fiber and had been hearing great things about 3M's Di-Noc Carbon Fiber vinyl wrap, so I picked up a few rolls to practice. I know its not for everyone, but I'm a fan and I think it can be implemented properly in our cars to add a little bit of a high end look! C63 AMG Interior: http://img.photobucket.com/albums/v2...llpaper_07.jpg I started by cleaning and preparing all the interior surfaces with a quick wipe down using Isopropyl Rubbing Alcohol, using cotton balls and swabs to get the little nooks and crannies, and followed it by using a lint free rag to ensure the surface was clear of any grease & grime http://img.photobucket.com/albums/v2...o/IMG_3349.jpg Since the dash is already apart, I began by purchasing a set of Macewen silver over-lays for the Guages & HVAC controls, as well as a 6LE Guage Trim: http://img.photobucket.com/albums/v2...o/IMG_3343.jpg http://img.photobucket.com/albums/v2...o/IMG_3360.jpg (Later on I'll separate the needles to wetland clear, and install blue LED's) I started by removing the HVAC knobs: http://img.photobucket.com/albums/v2...o/IMG_3345.jpg The Headlight dimmer was stubborn, so I ended up disassembling the switches and cleaning the contacts: http://img.photobucket.com/albums/v2...o/IMG_3348.jpg http://img.photobucket.com/albums/v2...o/IMG_3354.jpg Applying the decals was pretty straight forward: http://img.photobucket.com/albums/v2...o/IMG_3346.jpg I wasn't satisfied with the way the light grey knobs sat against the silver over-lay, so I purchased a can of Duplicator interior & vinyl spray, masked off the white indicator strip: http://img.photobucket.com/albums/v2...o/IMG_3356.jpg Finished product: http://img.photobucket.com/albums/v2...o/IMG_3358.jpg http://img.photobucket.com/albums/v2...o/IMG_3359.jpg http://img.photobucket.com/albums/v2...o/IMG_3362.jpg Now that the easy part of applying decals was over, it was onto tackling the 3M Carbon Fiber Vinyl, I purchased a good heat gun from Harbor Freight, and started applying the decal, but I wasn't happy with my first attempt, it bunched up at the edges of the radio bezel, so I'm going to retry when I'm fresh. I have a sheet of ABS plastic in the mail, as I am completely removing the stereo system from the car. http://img.photobucket.com/albums/v2...o/IMG_3357.jpg I'll keep updating the thread as I move along. Hope you've enjoyed so far! |
Neat stuff! Being that I have spares, my intent is to wrap the door sills and the sail panel triangle in some psuedo carbon fiber vinyl. I'll be monitoring your progress for sure!
|
Nice man. There is a thread in ls1tech's appearance & detailing section where some russian guy is wrapping real carbon fiber over the plastic parts. Its coming out extremely well! There's also a guy that added an OLED screen to the gauge cluster in lieu of the digital odometer. Looks pretty cool.
|
Looks awesome so far!
|
dont be afraid to really stretch the vinyl wrap when its hot to get over the curves and edges, that will prevent material from bunching up at corners. Looks good!
|
I've actually had some luck at using RIT dye to dye plastic in the past.
|
Looks great
|
Why not just wrap your current interior and sell me the ebony???? ;) lmao. I always wanted to customize my interior but I suck at arts and crafts
|
http://ls1tech.com/forums/appearance...-interior.html
http://ls1tech.com/forums/appearance...l#post18724656 What I was talking about. |
Looking good so far.
Quote:
|
Quote:
Quote:
That dash board swap though is amazing! |
Yeah that dashboard is intense. brings our cars into the current technology world lol
|
I'll snag a better picture later:
http://img.photobucket.com/albums/v2...o/IMG_3367.jpg This also came to replace the radio: http://img.photobucket.com/albums/v2...o/IMG_3368.jpg |
I managed to make a lot of progress this week, but theres a few parts still missing before I show off the finished center console.
I started by replacing all the bulbs in the gauge cluster with Blue LED's from www.superbrightleds.com, I ran into some trouble that I was unaware of. I thought it was a simple plug and play procedure, but I ended up needing to take apart the bulb assembly, dropping in the LED's and re-sottering the new LED's into the base. Factory bulb assembly: http://i88.photobucket.com/albums/k2...zeRender-2.jpg Factory bulb vs. LED's: http://i88.photobucket.com/albums/k2...zeRender-3.jpg http://i88.photobucket.com/albums/k2...t/IMG_3814.jpg Finished product: http://i88.photobucket.com/albums/k2...t/IMG_3811.jpg Next I popped off the needles and laid down a silver over-lay kit from Hawks. I took off the needles from the gauge assembly and used Dupli-Color interior paint and painted the caps semi-gloss black, then began sanding off the white/yellow base of the needles to produce a clear effect. In order for the Blue LED's to shine through the needle I painted the back with silver paint to give the needles a clear/silver appearance on the silver gauges. http://i88.photobucket.com/albums/k2...t/IMG_3819.jpg http://i88.photobucket.com/albums/k2...t/IMG_3817.jpg http://i88.photobucket.com/albums/k2...t/IMG_3820.jpg I also decided to keep my bolt-in roll bar that was in rough shape and needed a new coat of paint so I went with a Rust-oleum "Soft Iron" http://i88.photobucket.com/albums/k2...t/IMG_3816.jpghttp://i88.photobucket.com/albums/k2...t/IMG_3815.jpg It is a self priming paint and I laid it down thick and it turned out really good! Spray-can restoration at its best! |
Love all the little touches. Nice job.
|
Looking good man. How is the silver on silver? My only thought would be it might take more than a glance to see where the gauge is pointing. Excited to see the entire interior!
|
That looks great! I like the silver /silver gauges, will look sweet with the blue at night.
|
Quote:
|
Bringing an old thread back, but now that I have the car slowly coming back together, the LED's aren't coming on in the gauges. Is it possible that that when I re-sottered the LED's the original twist ins that they are polarized (an actual positive negative) and that if one is wrong, its causing the whole system to not power up? I had previously messed with my dimmer switch too so its also possible that it is also an issue.
Can I put a 9V Battery to the socket to get power to the LED just to test them individually? |
9 volt should work, yes. None work? Either you managed to put all of the leds in backwards or you goofed something else up :lol: Check the gauges fuse. Does anything else light up? Door panels, radio, hvac controls etc?
|
Agreed. It would be odd for you to put every single LED in backwards. If so, go play the lottery now.
|
Quote:
I didn't think about the door panel lights, as they are disconnected and I don't have a radio or HVAC anymore. |
It looks like it feeds the actual gauges, yes. Courtesy also feeds instrument cluster and there is a dimmer fuse as well. Also, the gauge lights are in parallel so one can be incorrect and the others would still work. Does the headlight switch light up or did you do an led there as well? It looks like the dimmer fuse feeds the lights, so I would start there. I believe it will be a gray wire coming from the fuse and going to the gauges. Check for power at the dimmer connector. If only one side has power with lights on, switch issue. No power, fuse/feed issue. Power to the cluster, cluster/ground issue. Let me know if you need further explanation or clean this gibberish up :lol:
Figure this might be up your alley http://ls1tech.com/forums/appearance...mats-ever.html Who knows if they are legit or just **** though. |
3 Attachment(s)
Really awesome detail work. Looks stock, but what I like is that if you know what your looking at, the right people will be amazed at the work put into it.
On a quick note, it you like the faux carbon fiber look, there are kits that use 3M backing for pre-cut stick ons. |
|
| All times are GMT -5. The time now is 08:03 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.