NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   Restorations, Fabrication, Tool and Shop Tech (http://www.njfboa.org/forums/forumdisplay.php?f=53)
-   -   1971 Camaro rebuild begins (http://www.njfboa.org/forums/showthread.php?t=54207)

SRC 12-08-2010 11:58 AM

1971 Camaro rebuild begins
 
Finally moved the camaro into the shop today to begin work. The car had not run in 14 years so we did some minor maintenance before trying to fire it up.
It ran so we can now decide to rebuild the 350 or find an LS motor.

http://www.youtube.com/watch?v=hYiaAgUgNYw

We'll begin disassembly and set up on the rotisserie in the next few weeks and report back.

Link to photos here:

http://summitrodandcustom.com/?page_id=149

BonzoHansen 12-08-2010 12:04 PM

Sweet. I was just dropping your name to someone at team camaro.

SRC 12-08-2010 12:14 PM

I'm hoping we can accomplish allot in the next few weeks. I want to have it road ready for spring. We'll see..

stoney2677 12-08-2010 02:33 PM

i'll be watchin this thread

omarcamaro 12-08-2010 04:27 PM

good luck ive been working on a 70 rs since may mine is slow going doing bodywork replacing quaters and floors

SRC 12-08-2010 05:06 PM

Nice trifecta you have there omarcamaro, 95,70 and 67!

omarcamaro 12-08-2010 05:08 PM

thank you to bad non of them run

1986IROCZ28 12-09-2010 10:58 PM

im gonna subscribe to this keep us posted

maroman88 12-10-2010 10:07 AM

thats awesome that it ran after 14 years of sitting

SRC 12-11-2010 10:02 PM

I tossed a coin on it running. Some WD 40 down the plugs, a new starter and battery were needed. I had to use another carb as the one on it was pumping more fuel out of the top than down the motor when we 1st tried it :lol: Plus I ran it off a jug rather than chance the lines and tank. I'm in touch with the PO who swore he put stabile in the tank....but

It did blow a pile of leaves and a mouse nest across the shop but it did run. We'll plan to tear it down anyway. It will go to BBC in Linden for a some what stock rebuild.

Its an original 350 car but the info I have so far leads me to believe its a 69 block so probably not #'s matching, once we have it out i'll know for sure. I wasn't concerned about the #'s and the price didn't warrant that being a factor.

I'm leaning towards painting it the original color, Muslane Blue (spelling?)

I do have a RS nose with upper and lower sections, a new tail light panel, new rear seat pan, fender and door. Once its stripped i'll have to see what other metal has been compromised.

Anti_Rice_Guy 12-11-2010 10:36 PM

Good luck, can't wait to see the progress pictures. I'll be the first to say I'd definitely go with Mulsanne Blue, it's an awesome color.

amargari 12-12-2010 09:12 AM

I may have to go check it out since you are only a few miles from my house.

SRC 12-12-2010 07:22 PM

Yes please do. Not much to see at the moment. Will continue to post progress.

aps63 01-11-2011 10:50 PM

Keep the pictures coming, it will be great to see the progress.
I'm working on a 70 RS at the moment.
Good luck with it.

SRC 02-02-2011 05:34 AM

Hope to get back on the car in Feb. Thankfully we have been busy on anything from final deliveries to a recent race car repair of a road race porsche 944

http://summitrodandcustom.com/1949-c...bo-gt3-racecar

As some of you may or may not know I have been building and competing with PCA and NASA in a few classes since 04; road racing is a totally awesome addiction. Some members reach out for paint work and crash repair.

The weather has also not been helpful, and Im sure this is the case for anyone trying to operate a business or just get around period! Stay warm and drive safe.


All times are GMT -5. The time now is 04:52 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.