Power Steering Line
 

Do these require fancy fittings/hose or will regular SS braided stuff do the trick? Its the pressure side, which is why I am curious.

And if it does require fancy crimps, know any local places that can fab me up a line?

Thanks

Must be rated for PS. I run it and have made it by hand. It requires ferrels on the inner hose.

Any hydraulic hose will work if the fittings thread correct right?

That I do not know. Summit sells a universal braided ps kit for a little over 100 I think.

iirc 2000psi spikes. is this for looks or need due to your changes?

It may not be needed but the pressure line is dangerously close to a hotside pipe. I want to fix it before its an issue later on.

The high pressure line has o-rings seals @ both ends. M*d*l*r Turbo sells a kit, or you can just sleeve it with one of those lava rock made sleeves by DEI (i think that who sells it).

Its not an LS1 Curt :rofl:

DEI makes all sorts of nice heat shield stuff. Check out aeroquip at least for info. I'll poke around for some info on other stuff I saw.

obligatory $0.02 warning. don't cheap out. I've seen PS hose breaks burn cars down.

Ironic post, is ironic :wink:

Its close, like touching pipe, not gonna deal with heat shield BS.

i was thinking new line & heat protection.

I would want to just run a long one and keep it well out of way. IDK.

Any of these help?

http://www.summitracing.com/search/P...ainless-steel/

Yikes! Not at those prices :rofl:

Says the guy with the turbocharged project car.

A manual rack/pinion would be cheaper :kneeslap:

We can make it. We have access to the tool.

Materials available, or knowledge of where to source em?

Napa makes hydraulic lines.

Yea I know, I am gonna call mai parker distributor tmmr at work

Think of the bulging muscles you'd develop parking your 'street car' then! :rofl:

Your assumption that my car will drive, is taken as a compliment.


:bertstare:

:facepalm:
.
.
.
My world is bigger than Ls powered cars, I have owned a few Lt1's. :bertstare:
See picture of Lt1 pressure hose.

Gonna say if ur gonna be building a faster car why not delete powersteering. Turn u into popeye with some massive forearms

Since they make them, I assume they have the things to make them.

:shock: