Swap Harness & ECU Question
Going to be going forth with a LS swap in a 00 Z28.
The Car- 2000 Camaro Z28 6 speed The Engine Trans and Harness were taken out of the car in order to swap it over to an older Camaro. The car still has a interior harness and what not in it. I have the chance to pick up a harness and ECU out from someone :bertstare: out of a 2003 GMC Sierra 1500 with a 4.8. Would that ECU and harness pair up and work with a plane jane 5.7 LS1? Or is there electronic TBs and what not ? |
the 4.8 has a DBW so its electric TB
|
Quote:
|
No no, what I mean by that is your camaro will be a DWB 4.8 monster.
|
Durty White Boy indeed......bad bitches only
|
Assuming the throttle body being DBW instead of DBC is your only concern, could you run a C5 Vette throttle body to circumvent that?
PS- Let the ****show begin. |
|
Quote:
Cliffs? |
Add in TPS and IAC connector to harness and you are golden. Least thats what the interwebz says and Al Gore wouldn't lie to me.
|
Quote:
|
Like I said, DBW 4.8 swap it.
|
Quote:
|
Trans/Transfer case sold, sorry brah
|
They will work but you need the ecu & harness of respective vehicle. the 411 and E38/67 ECU's are totally different.
You can DBW an older ecu but you can not cable an newer ecu. |
All times are GMT -5. The time now is 01:45 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.