Msd 2 step off clutch safety start switch
1 Attachment(s)
I originally have the 2 step in my 01ss off the clutch switch wire under the hood coming off the pcm.
I then figured out that the signal is coming from the cruise control disengagement switch so the 2 step is not disengaging until I am completely off the pedal Ran the wire Inthe car to grab signal off of the 2 wire switch on the clutch pedal that tells the car the clutch is depressed and car can start However both signals I am pulling will not work to engage / disengage the 2 step |
I had the same issue and ended up installing a trigger switch near the pedal.
|
Quote:
|
I don't know if I wanna leave off a switch with the stick too much going on
|
Quote:
|
Quote:
You have a picture of how u mounted ? I assume u did 12v and ground and then tapped it ran wire up |
Quote:
8-) |
Quote:
|
http://www.newark.com/multicomp/m141..._e4aAj518P8HAQ
That style switch too. Drilled into the side of the petal and a couple through bolts with nylon nuts so it all stays put :) |
I think we used two relays in mine with the factory saftey switch. I never added a trigger switch. I just had a third variable that I had to kill the nitrous/fuel solenoids when on the two step.
|
Quote:
Thanks! |
big big thanks to brian on here for the info i installed the switch and it works perfectly !
|
Glad you got it in there!
|
Quote:
|
Quote:
|
Quote:
|
All times are GMT -5. The time now is 02:34 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.