Lots for sale: drag radials, tail-lights, 3.55 ring and pinion, TPI electronics, etc
Selling off a bunch of stuff, if anyone wants more info on anything, just feel free to ask.
Prices do NOT include shipping. I am located in 07847 which is Roxbury NJ, so if you are local, might want to save on shipping. I am NOT going to ship the wheels/tires, those need to be picked up directly. -Also, my old exhaust (headers, y-pipe, electric cutout, and hooker 3" cat-back) was going to all be for sale, but my cousin already bought it from me. OEM 1987 rear IROC-Z wheels which are original to my car and were repainted and clear coated several years ago. The tires are the Mickey Thompson ET Street SS Drag radial tires that I used the past two years at the dragstrip AND on the street, even in the rain...and they were just fine in the rain. I made dozens of passes on them and they never failed me. They are 255/50/16 and have sufficient tread/use left on them. These tires cut several 1.4x sixty foot launches on nitrous and they only need a short 5-6 second burnout while at 19-22 psi and they will hook great. If you are looking for grip and traction, this is what you should buy. They sell for $255 each without a wheel. I am selling the pair of these (two wheels, two tires, mounted and balanced) for $250 total. Will not ship these. https://live.staticflickr.com/65535/...b57938eb_z.jpg https://live.staticflickr.com/65535/...fb77bc99_z.jpg https://live.staticflickr.com/65535/...75cd4d89_z.jpg NOS wet-nitrous platge for TPI intakes. Bolts right onto a TPI intake. I used this for about 6 years and it worked great but I am not TPI anymore. Sim $75 https://live.staticflickr.com/65535/...722726fd_z.jpg Some type of aluminum carburetor spacer. I think its for a mopar setup? I can measure it if someone wants me to. $15 https://live.staticflickr.com/65535/...ed238093_z.jpg Drake billet-aluminum hood pins. Bought these two years ago, and never installed them, just opened the package. I think they retail for around $100. I will take $60 https://live.staticflickr.com/65535/...d402c6b4_z.jpg https://live.staticflickr.com/65535/...2a324a6f_z.jpg https://live.staticflickr.com/65535/...1261e9b3_z.jpg short and long center caps for the Jegs SSR wheels. $5 each or 3 for $10 https://live.staticflickr.com/65535/...d36b2874_z.jpg Champion radiator cap (never used) but will fit oem 3rd gen radiators. $10 https://live.staticflickr.com/65535/...eaf5e4ea_z.jpg |
US Gears 3.55 ratio ring and pinion set. I used this for 2 years in the car with my moser 12 bolt rear. They never gave me a problem, but for racing I went to a 3.91 gear ratio so these 3.55s came out. Hardly any wear. this is the link with the specs and they sell for $300 new
I am selling them for $120. (You will need to buy the shim/bearing kit) https://live.staticflickr.com/65535/...28251a5c_z.jpg https://live.staticflickr.com/65535/...a00df2e5_z.jpg Modified OEM camaro IROC-Z tail lights. These were the original ones on my car. I peeled them apart about 10 years ago and did the red tail-light mod with the translucent candy red paint inside the lens to eliminate the orange turn-signal color. This is 100% legal in New Jersey. . They are NOT painted on the outside of the lens, so with some plastic polish and elbow grease, you can get them to shine. I had installed a battery kill-switch into the separate black plastic piece on the passenger side, so there are some drill holes from that, but I know you can replace the black plastic at a cheap price. $150 for both lights as seen https://live.staticflickr.com/65535/...d1de0a83_z.jpg https://live.staticflickr.com/65535/...32679402_z.jpg https://live.staticflickr.com/65535/...7252f864_z.jpg OEM TPI fuel pressure regulator complete $20 https://live.staticflickr.com/65535/...339f42bf_z.jpg OEM camaro lug nuts, keyed lugs (with key), and some oem lug studs: $20 for all of it https://live.staticflickr.com/65535/...5433d6c7_z.jpg https://live.staticflickr.com/65535/...d91d1f4d_z.jpg Those little plastic dress covers that go under the oem style seats to hide the metal seat brackets: $10 for all of em https://live.staticflickr.com/65535/...d2467774_z.jpg I forget what this was for, some type of vacuum distribution block for TPI? $5 https://live.staticflickr.com/65535/...bc7cffe5_z.jpg |
TPI style distributor with the electronic plugs in the back of the cap:
$50 https://live.staticflickr.com/65535/...450c8395_z.jpg The corner spoiler "wings" for oem style wedge spoiler on some 3rd gen camaros: $30 for the pair https://live.staticflickr.com/65535/...467a7a11_z.jpg https://live.staticflickr.com/65535/...f941608b_z.jpg AC delco re-man TPI ecu. This powered my car up until the day I pulled the engine out for the new engine, so it is 100% good $50 https://live.staticflickr.com/65535/...1d7af105_z.jpg https://live.staticflickr.com/65535/...bb31e8b4_z.jpg Relay assembly from my 1987 iroc. ECU connector on teh side and then the normal relays (MAF, MAF burnoff, and I think Fuel pump?) $30 https://live.staticflickr.com/65535/...72357c2a_z.jpg Working Mass Air Flow sensor and the rubber housing for TPI. (the pre-sensor screen is in place but the post-sensor screen I had removed) $50 https://live.staticflickr.com/65535/...88c15829_z.jpg https://live.staticflickr.com/65535/...88464bd7_z.jpg 95% of the complete OEM 1987 TPI electronic harness. Almost everything is there like all injector connections, battery ring terminals, starter stuff, relays, ecm plugs, distributor stuff, etc) I think i only removed the Torque converter lock-up connector and wires, and the oil pressure spade terminal and coolant temp sender spade connector. If someone has a bunch of broken connectors, or just wants these oem connectors, this is a good chance to get some without paying $10 per connector on places like year-one. Selling this as is for $75, and I would hate to bring it to the recycle center even though i could probably get good money for the copper wire. Would hope someone could make better use of it. I hand-labeled almost every connector as I removed it from the car 2 years ago so that is helpful. $75 https://live.staticflickr.com/65535/...39fcab99_z.jpg https://live.staticflickr.com/65535/...781aa0d1_z.jpg https://live.staticflickr.com/65535/...00c0098a_z.jpg https://live.staticflickr.com/65535/...5ea3b144_z.jpg OEM style steering wheel, just needs some cleaning up: $15 https://live.staticflickr.com/65535/...f2ced061_z.jpg Alternator bracket (pass side) and power steering pump bracket (drivers side) $10 total: https://live.staticflickr.com/65535/...174b118f_z.jpg |
OEM front drivers side and front passenger side seat belts and belt receiver setups:
$40 for the all of it https://live.staticflickr.com/65535/...5e4d374c_z.jpg oem thirdgen camaro shifter and knob. $15 https://live.staticflickr.com/65535/...5dc5f9cf_z.jpg https://live.staticflickr.com/65535/...e72bd0c8_z.jpg Front fender inner brackets: $10 for all 3 https://live.staticflickr.com/65535/...7d7d2a72_z.jpg 3" wide kevlar Top fuel nitro engine supercharger belt: $25 https://live.staticflickr.com/65535/...bd6eb185_z.jpg those foam triangle pieces that cover the upper rear shock mounts under the carpeting. $5 for both https://live.staticflickr.com/65535/...ed5ed573_z.jpg OEM strut tower mounts with plastic caps. bearings are still in good shape too $40 for the pair: https://live.staticflickr.com/65535/...55038859_z.jpg The whole oem steering linkage setup from my car. inner and outer tie rods, center link, pitman/idler arm? $25 https://live.staticflickr.com/65535/...e992632e_z.jpg SBC style (normal flow) water pump: $20 https://live.staticflickr.com/65535/...41e11ffa_z.jpg Modified combination valve (prop-valve to some people) : $20 https://live.staticflickr.com/65535/...2e9f6bfe_z.jpg |
Sold:
- TPI ECM computer - TPI relay configuration - entire TPI harness - Seat Belts and receivers everything else is still for sale |
bump
and MAF sensor sold Vacuum block sold sale pending on tail-lights Will be bringing some of the stuff to Island Dragway next weekend for their spring swap meet since my buddies got a vendor space and have extra room for me to put some stuff out. so if interested in anything, you can find me at swap meet. |
Price for the seat track covers shipped to 08037?
|
I think I can fit them in a small box, instead of trusting a bubble-wrap envelope. It will probably cost about $5 or so. Would $15 grand total be ok? feel free to Pm me, and I will send you my paypal info. Also, the only ones I have are those 6 covers, I think there should have been 8 in total, but two were probably broken or lost a long time ago.
|
this is the final thread bump before I let it close out.
sprayed, if you want those plastics, just feel free to send me a private message and we will get them shipped to you. Items that are sold and no longer available: - seat belts - TPI harness - TPI ECU - TPI relay block - vacuum block - MAF sensor and snorkel - nitrous plate - rear body corner spoiler pieces - both taillights Still for sale: - everything else! Hoping someone buys the wheels/drag radials, they work awesome! |
All times are GMT -5. The time now is 07:51 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.