NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)

- Engine / Power / Tuning (http://www.njfboa.org/forums/forumdisplay.php?f=31)

- - header bolt size issue (http://www.njfboa.org/forums/showthread.php?t=10393)

IROCdan330

04-26-2005 06:05 PM

header bolt size issue

I want some Stage 8 locking header bolts this time around...as the ARP studs didnt work out due to clearance issues around the primaries (the nuts were too big). I dont know whether to get the 3/4" long ones or the 1" long ones. If it helps, hooker 2055 headers and vortec heads.

http://www.thunderracing.com/catalog...&vid=6&pcid=54

The Fixer

04-26-2005 10:55 PM

You'll probably need the 1" long ones, especially if the header flanges are thick. Can you measure how deep the the heads are threaded?

All times are GMT -5. The time now is 01:02 AM.