NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   Engine / Power / Tuning (http://www.njfboa.org/forums/forumdisplay.php?f=31)
-   -   Header install (http://www.njfboa.org/forums/showthread.php?t=11483)

GrandmasterCow 06-28-2005 04:46 PM

Header install
 
hey, i just received my new longtubes and ory, i was wonderin if anyones probably in the area this or next week, interested in assisting in the install. ill provide food and the what-not if ya interested.

later
eric

Jersey_TA 06-28-2005 06:26 PM

Re: Header install
 
Quote:

Originally Posted by GrandmasterCow
hey, i just received my new longtubes and ory, i was wonderin if anyones probably in the area this or next week, interested in assisting in the install. ill provide food and the what-not if ya interested.

later
eric

PM chummmma over on C.I.

GrandmasterCow 06-28-2005 07:36 PM

Re: Header install
 
Quote:

Originally Posted by Jersey_TA
Quote:

Originally Posted by GrandmasterCow
hey, i just received my new longtubes and ory, i was wonderin if anyones probably in the area this or next week, interested in assisting in the install. ill provide food and the what-not if ya interested.

later
eric

PM chummmma over on C.I.

thanks just sent him a pm

Jersey_TA 06-28-2005 08:46 PM

What kind did ya get?

GrandmasterCow 06-28-2005 08:47 PM

brand new flowtech lts. ceramic coated with ORY, simulators and o2 extensions all included form this kid that drove from edison to my area (1.5hr drive). 400$ and it was opened only to take pics.

Jersey_TA 06-28-2005 09:20 PM

Quote:

Originally Posted by GrandmasterCow
brand new flowtech lts. ceramic coated with ORY, simulators and o2 extensions all included form this kid that drove from edison to my area (1.5hr drive). 400$ and it was opened only to take pics.

Wow 8)

deadtrend1 06-29-2005 04:41 AM

Thats not a bad deal at all. Where in south jersey are you?

IROCdan330 06-29-2005 05:30 AM

Quote:

Originally Posted by deadtrend1
Thats not a bad deal at all. Where in south jersey are you?

agreed.

GrandmasterCow 06-29-2005 06:33 AM

near mullica hill, east greenwhich, woodbury,deptford,wash. twp, etc...

GrandmasterCow 07-13-2005 11:01 AM

nevermind, monday and tuesday me and my friends in delaware did the header install and it feels awsome. i do however want cats. the rasp is just annoying. (Flowtech Longtubes, ORY. SLP LM) anyone got any good recommendations?

Tru2Chevy 07-13-2005 11:14 AM

Quote:

Originally Posted by GrandmasterCow
nevermind, monday and tuesday me and my friends in delaware did the header install and it feels awsome. i do however want cats. the rasp is just annoying. (Flowtech Longtubes, ORY. SLP LM) anyone got any good recommendations?

Pretty much all of the hi-flow cats are the same. Just a grab a set from eBay and slap 'em in there.

Or you can save a few bucks and toss a bullet muffler in there.

- Justin

Batman 07-13-2005 11:38 AM

My recommendation is toss the LM, CATS don't help much with longtubes and a LM. Right after my headers went on I dropped the LM for a Magnaflow. Still have no CATS and it is more then reasonable sound wise.

PA_GregSS 07-13-2005 01:17 PM

I hated the rasp I got after putting my Pacesetters on. I had a single cat welded in after the ypipe and before my dump. Took care of all of the rasp. It made the car sound much deeper too.

GrandmasterCow 07-14-2005 12:48 AM

yeah that rasp is just annoying. also, does anyone have any o2 sims i can borrow/buy? i need'em for thursday, might run at the track, not sure yet.

foff667 07-14-2005 06:38 AM

Quote:

Originally Posted by GrandmasterCow
yeah that rasp is just annoying. also, does anyone have any o2 sims i can borrow/buy? i need'em for thursday, might run at the track, not sure yet.

borrow? unless your going through inspection it shouldnt screw anything up...the rear o2's are just code throwers and dont do much else.

GrandmasterCow 07-14-2005 11:54 AM

Quote:

Originally Posted by foff667
Quote:

Originally Posted by GrandmasterCow
yeah that rasp is just annoying. also, does anyone have any o2 sims i can borrow/buy? i need'em for thursday, might run at the track, not sure yet.

borrow? unless your going through inspection it shouldnt screw anything up...the rear o2's are just code throwers and dont do much else.

for real? oh i thought they would mess it up. well, i also need those codes and the AIOR and EGR all deleted cuz the AIR and EGR are gone =]

foff667 07-14-2005 11:57 AM

Quote:

Originally Posted by GrandmasterCow
Quote:

Originally Posted by foff667
Quote:

Originally Posted by GrandmasterCow
yeah that rasp is just annoying. also, does anyone have any o2 sims i can borrow/buy? i need'em for thursday, might run at the track, not sure yet.

borrow? unless your going through inspection it shouldnt screw anything up...the rear o2's are just code throwers and dont do much else.

for real? oh i thought they would mess it up. well, i also need those codes and the AIOR and EGR all deleted cuz the AIR and EGR are gone =]

alot of people also get some KR once they delete egr...might wanna get that taken care of as well.

Batman 07-14-2005 12:27 PM

I have a set of brand new Sims on Ebay for about $20 less then retail (go for $45 each or so, am selling for $75). i would go the Sim route personally, that way if they scan the OBD II it will still be "reading them". I don't know about NJ but if you delete codes in NY it will spit out a not ready on the inspection.

http://cgi.ebay.com/ebaymotors/ws/eB...MESE%3AIT&rd=1

foff667 07-14-2005 12:32 PM

Quote:

Originally Posted by Batman
I don't know about NJ but if you delete codes in NY it will spit out a not ready on the inspection.

if its tuned incorrectly you can run into this problem...cbrrmike just passed the readiness tests after I deleted his codes with no problem...he didnt have cats so failed the visual though.


All times are GMT -5. The time now is 10:10 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.