![]() |
Does your car burn this much oil
have a 2000 Ws6 Transam, all done up, mild cam, ported and polished heads, headers, exhaust, 4:10 gears. The whole bit. putting 405RWHP. 11:1 compression. I drive the car pretty hard when I drive it. Uses about a quart of oil every 1000 miles..
It used a quart to quart and half every 3000 miles before the heads and cam so I know the car went through oil already, just seems like a lot now. Thanks, Sam |
yah that seems like alot of oil consumption even for an ls1...fwiw mine burned less then 1/2 qt every 3k even after my heads/cam...whos heads do you have? What type of valve seals do they use? I've heard teflon seals arent good for street driven cars & can leak a little oil :shrug:
|
piston slap and oil consumption...2 things my ss knows very well, i was at about 1QT every 800 miles, i tried going to the dealer but after a few months I wasnt getting anywhere and it wasnt worth it, and i gave up, it has gotten better since then, i'm at about 1 qt every2000 miles now... i used beat on my LS1 alot, but i calmed down lately. i just decided to do a motor swap so i just need my ls1 to last me another 6-7 months. but the oil consumptiuon is a know ls1 issue.
|
I'm with Bill, find out what kind of vavle seals you have. If they're teflon, get them out of there and get some regualr ones (i.e. not race pieces)
|
All times are GMT -5. The time now is 10:54 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.