new motor
 

ok i just got a 4 bolt main 350 bored 40 over or what ever .40 anyway will everything off my motor fit on that like water pump heads intake manifold altanator ac condenser like all that stuff everything except internels i need to know oh and will my tranny bolt up 4l60e trans did i mentan it was free and nothing wrong with it

is it an lt1/4?....if yes, then yes....if no, then no

If its not from a LT1/LT4 Generation II small block car it will not work.

LT1's use reverse flow cooling, the internals are pretty much different then your standard Gen I small block.

oh i am not sure the guy told me everything would work but he was drunk at the time too so i dont really know lol

everything including the internals will work only thing that needs changed is the pistons, obviously due to the oversize, and the trans will bolt up just fine. as long as the blocks are like...like if you have an lt1 in the car now thats a 2 bolt main and ya switch to an lt1 thats a 4 bolt main. if ya have an lt1 now and ya wanna swap the stuff over to block that isnt an lt1, that wont work.

oh ok thanx for the help

You need to give some more info on the motor. It might be a built LT1 with a 4 bolt splayed main. Also, the Vette LT1's came as 4 bolt mains. And as someboy already posted, you have to find out if you have reverse cooling heads. From what it sounds like, you don't know too much about the motor....as the guy who told you was drunk. Try and find out some specs.

i'll look into it i was gonna be puting my heads on their