Stuff for sale before i go away to school
 

RK Sport Ceramic Coated Headers for 94-95 LT1, no y pipe. I will get a pic soon $25.00

LT1 Fans, good condition 15$

Pacesetter Long tubes, will fit 94-95 LT1, there was a problem with these headers, the AIR hookups were not positioned right, its got the right part number on it. I quess you could just cut them off and patch them up. Also the driver side collector was too close to the floor board, it need to be bent down or something. The reason i'm selling these is Pacesetter was supposed to send me a return shipping label, i called and e-mailed the guy from pacesetter but after 6months of no response i think its time to sell these. Â*heres some pics of the mod that need to be done to the AIR hookup, and the floor board, the pics are self explainitory:
http://home.comcast.net/~maskedmullet/Picture_002.jpg
http://home.comcast.net/~maskedmullet/Picture_003.jpg
http://home.comcast.net/~maskedmullet/Picture_004.jpg
http://home.comcast.net/~maskedmullet/Picture_005.jpg
http://home.comcast.net/~maskedmullet/Picture_006.jpg
http://home.comcast.net/~maskedmullet/Picture_007.jpg
http://home.comcast.net/~maskedmullet/Picture_008.jpg

$75. OBO

4 1995 Z28 Wheels and tires, the rims have curb rash and the paint is chipping off, the kuhmo tires have very little tread left, take them off my hands for $20 for all 4 of them.

Head liner from a 2000 WS6 Trans Am with T-tops, its grey. $10

3.42 series 3 ring and pinion set from a stock m6 tran am, 500miles on them, no chips or any damage on them. $50 OBO

series 2 2.73 gears 76,000 miles no chips or any damage at all, $15.00


i will get pics of all items when i don't have to work. if you have any questions my e-mail is maskedmullet@comcast.net thanks!

P.S. i'm located in South Jersey in Clayton which is right off rt. 55

Any Idea how that problem with the LT's could be fixed?

sorry i forgot that pic, http://home.comcast.net/~maskedmullet/Picture_001.jpg



http://home.comcast.net/~maskedmullet/Picture_005.jpg
also in this one you can see the floor is in the way of the collector, the pacesetters i have now are a little lower and they have more room for the y pipe to fit on, we compared the new ones i got to the old ones and they had 1/4 inch more clearance at the collector, all you need to do is bend them down a little to make that clearance.

P.S. the pacesetters are uncoated, i did paint them with a high temp paint but it will flake off after about 2 days, what i did with my current ones is have them fully wrapped in header heat wrap, make sure you do it before its on the car or you will have a hard time wraping them when they are bolted up.

i updated the prices, i just need to get rid of this stuff, i need gas and toll money to get to school :burnout:

any good exhaust shop can take care of both issues. if you came down this way to mufflex they also make really nice y-pipes for LT's on LT1's :)

later
tim

You have a PM

for pictures of mufflex y-pipe quality see my webshots 8)