...to finish the bronco or not.... ?
well I have a 95 eddie bauer edition fullsize Bronco, i bough it about a year and a half ago. It had a major engine fire and burnt all the way up to the steering column. Now i cant decide if i should finish it, sell it as is, or strip it and sell the parts.
Last February I finally got to work on it and I removed all the damaged parts and pulled the motor and trans. I repainted the firewall inmside and out with POR-15, instaleld a new windsheild, installed a new dash, and heater box. Since then I have bought all new front end sheetmetal, grille, and headlights. I also bought the stronger C6 automatic 3 speed transmission, and a 351W motor with 8k miles on a rebuild. I have 6" lift rear springs and a 8" skyjacker front end lift kit. I rewired the truck with a custom hotrod wiring harness/fuse blcok so i wont have to worry about another fire(ford has a recall out for it finally).
All i need to do is drop in the drivetrain, wire up the motor, and install the front body parts. To finish the motor i need just to get a distributor, timing cover, exhaust, and shocks. So its almost complete but I just dont know if i want the truck anymore. A modified bronco will only get like 3-4k and right now i have about 2500 into it and the parts needed will run me about another 1k. So if i sell it when its done, ill just break even or id just keep it, but i dont need another vehicle that much, but id like a huge lifted 4x4. I'll probably keep it and finish it but i needed to vent. lol. On top of this project, I need to do a motor swap in a 95 camaro, major suspension repair on a 94 z28, strip a 94 v6 camaro, and finish the dahm exhaust on my monte hopefully all by christmas. i guess i love stress....
oh and one last note.... check out my ebay store. I'm adding parts every few days.. WWW.stores.ebay.com/camaro-firebird-garage |
