Crazy Contraption..need feedback
 

just a question, i am throwing this contraption together and i want to get some feedback from you guys on how u think this is going to work out. 350 HO with Edelbrock torker intake (carb) adapter plate (for throttle body), throttle body spacer, twin 50mm throttle body, edelbrock TES headers and 3" flowmaster cat-back. Any feedback would be helpful, i dont know if anyone has really tried this before.

that should move along damn good. fasterthanyou has the 350HO with a performer RPM and he trapped around 103mph at the track in a full weight car.
tuning is going to be important to get full potential out of it. a stock chip will run the car, but nothing like a custom chip
what injectors and fuel pump are you using?

what injectors, cam, fuel pump, and if your running the stock hood, the inj. spacer might push it over the limit... im running an rpm intake w/ adapter plate on my car and its right on the bare edge of fitting under the hood

your going to need to change the fuel pump if you want any sort of performace, at least to 190lph i have a 255lph, also the tune is the most important part of making it run right

clearance is no problem ... 4" cowl, but it has a stock cam, 350 high flow injectors, getting a custom chip programmed eventually with an adj fuel pump from 7-21 psi.

adjustable pump or regulator?
get a 255lph walbro in tank replacement pump. make sure that thing is fed safely. :)

find out the specs on the stock cam... and get the walbro 255lph pump its awesome... and your going to want to get the adjustable fuel pressure regulator to feed it well :p

i have the adj fuel pres. regulator, i will get the specs on the cam, and i will also look into the 255 lph. thanks guys, any further advice/comments will be helpful

That pump better be awesome ;) hahahahha wassup D-Bo.

its pretty wicked... keeps 2 90#injectors steady at 16psi WOT through 5500rpm heh