NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   Appearance (http://www.njfboa.org/forums/forumdisplay.php?f=29)
-   -   I need some quick engine cleaning tips! (http://www.njfboa.org/forums/showthread.php?t=15104)

WayFast84 01-22-2006 10:02 AM

I need some quick engine cleaning tips!
 
Well since today is such a nice day, and yesterday I bought engine cleaner while on the way to the meet, I think I will clean the engine and bay! But the last time some one tried to clean the engine bay he shorted the ecm out (at wich point he just parked it for 10 years) I was wonderin what I sould do so that it does not happen again?

84HOtransam 01-22-2006 10:53 AM

Quote:

Originally Posted by WayFast84
Well since today is such a nice day, and yesterday I bought engine cleaner while on the way to the meet, I think I will clean the engine and bay! But the last time some one tried to clean the engine bay he shorted the ecm out (at wich point he just parked it for 10 years) I was wonderin what I sould do so that it does not happen again?

make sure you dont get any water into the intake/carb...make sure the car is all dry before you start it or turn the key after washing it..

polishing compound works well on the paint under the hood...

90FormulaWS6 01-22-2006 12:00 PM

also cover the distributor and anything else that you think will be effected by water

WayFast84 01-22-2006 01:17 PM

All right Im done looks good! I went to start the car and it started but was idling bad and stalled then I put the old air cleaner on (factory) and it was fine! could a edelbrock aircleaner assembly make it not idle?

Tru2Chevy 01-22-2006 02:36 PM

Did you get any water on the aftermarket aircleaner? If so, that could be causing the stumble at idle. Let it dry out for a while and then try again....

- Justin

WayFast84 01-22-2006 07:02 PM

Well I took the after market cleaner out when I cleaned it Its runing fine right now had a freind drive it to the mechanic so I can get the headers installed! and then the battery died when we got their...


All times are GMT -5. The time now is 02:49 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.