What intake?
 

What vortec intake manifold do you recomend for theese? http://www.jegs.com/webapp/wcs/store...0187&langId=-1

:nod: Im goin vortec :nod:

and where are the self alighning rockers?!?!?!~

depends, are you going carb or EFI? I'm getting vortec heads along with a holley stealth ram efi.

~Ted

Carb, what gaskets and bolts? omg this list is getting real expensive... and where to get the self alighning rocker arms I cant find them on jeegs
but im looking at this http://www.jegs.com/webapp/wcs/store...1935&langId=-1
would the $349 work? does it come with electrical stuff??

No, the one you linked up is only the upper plenum and intake manifold, this is the whole kit..intake, plenum, injectors, fuel rails, TB, and wiring... http://www.jegs.com/webapp/wcs/store...tegoryId=21447

~Ted

Do a search "vortec intake manifold" a lot of stuff comes up..TBI, MPFI, and carb applications.

~Ted

I knew it was to cheap to be true...

http://www.jegs.com/webapp/wcs/store...tegoryId=14237

part#
350-2116
Is that good?

Don't you have a 305?

Check out www.sdpc2000.com . They are a large GM performance parts center in Texas. They should have an intake that will work with Vortec heads.

http://www.sdpc2000.com/search.asp?s...+arm&doquery=1
wich one?

if you have a 305 they wont work but if you still want a pair i have them 400.00 with self aligning rockers, assembled with valve springs on a running engine. ill give you the carbureted intake for 75.00. and if you need a 350 i have a complete one that can use the heads and intake, the car that the heads are on goes 13.34 in a 3500lb 77 camaro with a very mild cam. pm me for info or questions