HELP WANTED
 

anyone want to help me out one weekend. need help installing a custom turbo kit ona 3rdgen v6 rs.work will be done inside a shop.this car is a daily driver so i could use all the help i can get,this way i can get it installed in one maybe 2 days tops.somone who can weld or uyse a tubing bender a + :)


FREE BEER

It's been 4 years since i did any type of metal working, but I'm always glad to lend a hand if i'm free when it goes down.

what night is this planned for? give me some details on date and time and i will let you know. i can weld OK, only used a tubing bender once before.

I've used tubing benders before and I can weld. let me know when you plan on doing it so I know if I'm free.

free beer was all I needed to hear :D

as long as i have all the parts in my hands, like sat/sun april 8th/9th and i have the shop all day 8am till 10 pm on both days
any help would be greatly apreciated

edit i forgot to mention
the shop is in milltown nj ,literaly 1 min away from the cnr show

whats_the_chance_anyone_has_th_stuff_needed_to_bur n_a_new_chip?
i_have_the_new_tune_already_just_need_it_burnt_to_ a_chip.
my_friend_that_usually_does_it_wont_be_aropund_til lk_early_may

milltown as in next to east brunswick?

yes

i live in new brunswick on the border of milltown and north brunswick i might live maybe 2 mins from you... ill be free sunday the 9th and i have what you need to burn a new chip so long as you have flash chips, i also weld and have done many custom exhausts

btw how do you already have the tune done? is it a base tune to get it up and running?

crap if you need help during the week i can swing by and lend a hand but i think im goin away this weekend.

im_not_doing_anything_this_week.To_busy_in_the_sho p
the_weekend_of_the_8th_and_9th_is_when_i_plan_on_d oing_the_install
with_ther_exception_of_mounting_the_intercooler_wh ich_i_will_do_this_weekend

yeah_its_a_base_tune
though_the_stock_tune_should_be_good_for_7psi

pss_sorry_about_typing_at_work_with_busted_keyboar d

this is deff going down on 4/8 and 4/9 if any ya guys wanna lend a hand

only thing im waiting on for now is my new injectors

do you have flash chips and the correct adapter for your ECM?

90formula thnx but i just found out the base tune i have wont work, it was setup with stock injectors and no fmu.and ill be running a 10-1 fmu with 3.4 injectors.so with that tune the motor would prolly go dead rich . so for now ill just take 2 degrees base timming out and let the msd btm do its job

I might be able to help, cause im a nice kid, I wont be much of a help though :(

lol as long as u have hands and can turn a wrench, u can be of help lol.

will you some day return the favor?



:rofl: :mrgreen:

of course, im not an ahole lmao

Ill talk it over with the mom :lol:

dur to the fact we broke the transmission we wont be installing the turbo this weekend,will be installing the follwing weekend instead 4/14-4/16 if anyone is still interested in comming to give me a hand :)