|
lots of sbc and 3rd gen stuff/pics (UPDATED LIST)
MORE STUFF ADDED BELOW
ok im gonna list this stuff one last time i need this stuff gone as ive run out of money to complete my turbo rs project. #1 350 4 Bolt main block Bored/honed .030 over Cleaned and painted $400 #2 moroso elc water pump used 25$'s #3 1 set sbc 5.7 rods w/arp wave lock bolts(shot peened/fluxed) 175$'s #4 1 cast 350 crank not cut under perfect $100 #5 1 b&m converter for 700r4/2004r 30 spline 2,500 stall used 600 miles $250 #6 2 flywheels 20$ each +1 #7 2 Hei dizzys used 20$'s each [ #8 1 set mid lenght 3rd gen headers new(hooker) 100$'s #9 2 sets excelent condition 3rd gen iroc tail lights $50 pair #10 1 set mint t-tops (3rdgen) with key $100 #11 1 set ported 882 heads 74 cc chamber 2.02/1.60 valves 3 angle valve job (excelent street heads) #12 1 3rdgen 4 wheel disc brake master/prop valve 50$'s #13 1 87 power side harness mint $50$'s #14 2 weld draglites 15x8 dual pattern with used (3 passes) hoosier drag slicks do5 compound 26x9x15 $400 #15 1 set 89 rs rims no center caps/no curb rash grey/silver 15x8 75$'s *no longer for sale* #17 1 rebuilt 700r4/****kit(street strip) $200 cant remeber what else i have but i know theres more ill add it tom after work no reasonable offers refused |
#2 moroso elc water pump used 25$'s
Ill take it, do you mind shipping it? Does it work? |
it worked when i bought it 2 years ago,but i never used it,but i will hook it up to a battery and make sure it works,yeah ill ship that might be a lil exspensive though it is pretty heavy.whats ur zip code so i can get a quote on shipping
|
08052
USPS parcel post should be the cheapest. |
theres a friend of mine in need of a good 700R4, i will talk to him about it!!
|
Quote:
Headers have Y-pipe included? O2 bung already on? AIR or no AIR? |
Quote:
r0nin89 no y pipe i belive they hook to the stock y pipe,no air,and i cut the o2 bung off cause i needed to replace on on the rs and didnt have any laying around the shop ,but if u want the headers i can weld another o2 bung back in its place |
So the collector is 2-1/4? I'd expect it to be 2.5 or 3. Either way enlighten me on "mid length headers" I take it that means not shorties but not long tubes? But will I have to fab up a custom Y pipe?
|
Quote:
|
#16 the iroc rims, u got pictures of them?
|
how many miles on the rebuilt trans?
~Ted |
88ta yes i do ill post them when i get home
ted about 20,000 |
add to the list
1 set gm bowtie heads w/port matched edelbrock victor jr intake/and holley 750 dp will not split up (make offers) 1 89 camaro gauqe cluster 115 mph 30$'s 1 set 89 rs tail lights 25$'s 1 set front calipers 3rdgen 60$'s 1 set 1le sway bars 100$'s frt/rear 1 complete l98 40,000 org miles bone stock/never touched/with 700r4 same mileage (make offers / will not split up) |
r0nin89 the collector is 2 1/4, though i was to busy at work today to run to my friends house and throw them on his car to see if the stock y pipe fit
rob ws6 i didnt forget about u ill have that shippipng quote tom |
No prob. :D
|
Alright thanks then I'm building a 3" exhaust with a 2.5 mid pipe so thats a no go for me. Thaks though!
|
Which v6 heads are those?
- Justin |
opps some pics there werent supposed to be there, those would be thegmpp canted valve heads 2.8/3.1/3.4
|
Quote:
and rob sorry i forgot about ya and the shipping quote i promise ill get it tom while im at work |
im intrested in the l98, but not the 700r4 attached... $500?
|
alright heres a package deal on the block,crank, rods, heads, flywheel, dizzy, edlbrock intake(not sure which one would have to check)and 600 cfm edl carb and slicghtly used rockers(used to break in an engine for 700 miles before swaping to full rollers)
800$'s with converter and trans 1,000 converter alone is 425$'s or if ya dont liek the prices make me an offer on the stuff i need this stuff gone |
rob ws6 it will be 14$'s to ship
|
lethal PM me ur number, and ill have the guy get intouch with u bout those rims
|
pm sent
|
| All times are GMT -5. The time now is 04:58 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.