69 maro! Protouring? *pics*
 

My friends 69 maro! Its clean... Mint! just finished installing the new 427 and TKO600... has a moser 9", wilwood brakes and a slue of other beautiful mods!

Let me know what you think! I will pass on the word!

Sorry for the poor pics... I will have better ones soon enough! We just snapped these when it still had the 350 in it! :D He wanted pics before the swap! So here you go!

Joe

http://i41.photobucket.com/albums/e2...esizedmaro.jpg

http://i41.photobucket.com/albums/e2...n/P4011172.jpg

http://i41.photobucket.com/albums/e2...n/P4011171.jpg

http://i41.photobucket.com/albums/e2...n/P4011169.jpg

Looks nice. Looks like the headlights were updated too, maybe DSE parts.

Are those old skool slapper bars out back?

Looks cool man!

- Justin

Not firmiliar with that term but if that means traction bars... Then yes those are "new school" traction bars! :D

They have been removed... Since he lowered the car a good 3 inches he didnt like how the rear was riding. So they are gone!

And about the head lights... Just as many of the parts on this car... I dont think much of the trim and such is original...:D

Joe

Heres pics of the interior and the 350 he had... Not the 427! Like I said Im going to have him take it out soon and we will go out for pics!

Joe

What did he do with what appears to be the 330 hp GM crate engine. Wayfast should buy it!

I'd love to hear about the mods to the car.

Looks very good :drool:

damn makes me want to start a first gen restoration, to bad i wont have the facilities to do so for about two years.

Parts list for Bonzohansen!


-World 427 World Class all aluminum block and aluminum heads

-Headman 1 ¾ inch headers coated inside and out

-2.5” Stainless Flowmaster exhaust

-Tremmec TKO 600 5 speed trans with .64 final drive ratio

-Moser 9 inch rear
-31 spline axles
-3:70 gears
-Posi

-Qa1 Adjustable Coil-over suspension
-Variable Rate Springs

-Hydraboost Brake System

-Wilwood disc brake conversion
-12 inch rotors

-Global West Tubular upper and lower control arms

-Detroit speed 3 inch drop springs in rear

-Competition Engineering Frame Connectors

-Lakewood Traction Bars

-12:1 high performance steering box

-Custom Leather Interior

-Simpson 5 point harness

-Covans Custom Caron Fiber Dash(second dash ever made)

-6 point roll cage with removable side bars

-Budnik Fomosa Steering Wheel

-Flamming River Adjustable Steering Column

-Budnik Fontana Fat Lip Wheels
-17 in front 18 in rear

-Falken Z rated tires
Front: 245/40/17
Rear: 275/40/18

-Custom Balanced Drive Shaft

-March Serpentine Belt System

-Vintage Air a/c

-Detroit Speed Headlights

-Cowl Hood

-Optima Yellow Top battery

-All billet specialties aluminum brackets under hood

-Billet power steering pump

-Stainless Steel Braided lines


As for the parts for sale below... They may be taken... He says he has a possible buyer! Let me know ASAP if there is some one interested! Ill tell my friend tomorrow!

For Sale
-GM 350 HO Deluxe
-Holley 650, Vortech Heads, Corvette Pink Rods,
-330 Horse 380 ft/lbs

-700 R4 Trans
-Close ratio 4 speed with overdrive
-B&M shift kit and shifter

There you have it! Hopes that clears some stuff up!

Joe

Jon (chevelle) may be interested in that 4-speed....I know he's looking for one for his '64.

- Justin

Thanks justin but I need a wide ratio trans. But I wouldnt mind some info on that 4speed!

Sorry guys... He wants to sell everything together as a package...

But bad64 none the less Ill see what I can get out of him about the trans!

Joe

That new setup is really nice. I would love to have an all aluminum 427 SBC with a TKO 600. Very nice ride.

Very pretty, Im not crazy about the wheels, but that wouldn't stop me from taking it off their hands :)

that car is super sexy I would take it in a heartbeat...witha 427 it would even be a hard choice for me to not take that over an new LS1 TA.

i saw that dood on ls1tech.i heard he was getting new rims or something

He wants new rims... Is he going to get them?... I dont know... :D :D :D

Joe

550 at the crank on pump gas! ;)

Joe