![]() |
punchlist for 3rd gen exterior/interior
for the 86, Ive made of list of odds and end items i need. There will be more comming as i go along, but for now this is a start.
-Metal retainer for the front bumper cover. This is a 2' (ish) strip with 4 holes and it goes behind the nose on the top and bolts the nose to the metal pan that goes between the headlights. -85-up firebird radio/HVAC pod and i need the faceplate for it to. Justin told me at atco sunday he should have this, but doesn't know if its in perfect condition or not, nor that he has the faceplate definetly. -Firebird HVAC controls. There are camaro ones in there now -Rear ashtray for the firebird center console -armrest for the center console. -Firebird auto shifter assebly. T Handle style 87-90 Trans AM third brake light (one that goes under the wraparound spoiler) Swapped hatches to rid the 86 style high mounted brake light and the one thats on there is cracked on the outside. -light bracket for the rear license plate light. The bulb is just dangling freely on the wire -This one might be tough to explain, but i need the line that goes from the power steering pump to the steering box. Not the long one that goes back and forth under the radiator. Ill take a picture of what one i need if necessary. -"Trans Am" style dashboard pocket. Preferably the 2 pocket style Either PM me, email me at deadtrend1@aol.com or im usually on AIM as "TIMNJTA". I sometimes am away fromt he computer but send a message and ill get back in touch with you. |
camaro and firebird shop in williamstown will have everyone of those parts.
|
Quote:
|
Shoulda posted this earlier. I JUST threw out all my third gen parts this morning. Nobody wanted them, so I got rid of them. I had the brakelight, armrest, T-handle, and ashtray.
|
talk to ted gerlach
|
Quote:
|
Quote:
|
i also just threw most of the stuff you listed in the garbage..dang it..
|
ok, i should have the retainer thing and i know i have the HVAC controls, i should also be able to dig up a power steering hose, you are looking for the one that has the fittings that screws into the box correct? thats the high pressure line, the side with just hose clamps and the cooler(long lines under rad support) is the low pressure return line. I also have 4-5 of the T-handle shifters. and finally, i should have the liscense plate light thing on a bumper somewhere or on one of the harnesses i have.
Only problem is, the hvac controls and t handles are buried in a huge box thats under a stack of boxes so they arent easy to get to right away. lol. |
Quote:
|
I think I have the heater controls too. I can look if you want.
|
Quote:
ya he is a bitch to get ahold of can usually get lucky with getting ahold of him saturdays. |
I'll go through my leftover parts tonight and I'll let you know if I have that pod and the shifter handle. I'll also check for the faceplate.
- Justin |
Quote:
|
i have most of the parts you need dead IM ME
|
Quote:
Quote:
|
I've got a good console armrest if you need one. Let me know.
|
I have a mostly complete 87 GTA i'm parting out if you're still interested in some parts :-)
Thanks Jim 215-669-1696 |
I have the radio pod bezel (good but not perfect condition) - free
I have the red lense for the underwing third brake light, without the rest of the assembly - free I have 2, 2-pocket map pockets, one with the Trans Am lettering and one with just the Firebird emblem. Both are in yellow (gold). The map pockets are both worn but servicable. - free Just come pick them up if you're in central Jersey. |
All times are GMT -5. The time now is 09:45 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.