summer clean up
 

once again
350 4 Bolt main block Bored/honed .030 over Cleaned and painted $400
1 set sbc 5.7 rods w/arp wave lock bolts(resized/shot peened/fluxed) $150
1 original 350 crank-mint not cut under $100
1 b&m converter for 700r4/2004r/4l60e 30 spline 2,500 stall used 600 miles $250
1 set mint t-tops (3rdgen) with key $100
1 3rdgen 4 wheel disc brake master/prop valve $50
1 set gm bowtie heads w/port matched edelbrock victor jr intake/and holley 750 dp
will not split up (Make Offers)
1 set front calipers 3rdgen $60

can you shoot me specs on the bow tie heads?
milled?(what CC are the chambers?)
valve sizes?
angles on valve job?
what springs/retatiners/locks?
got flow sheets?

will do will even get pics tom

neg on pics and specs today,didnt goto work,its gonna have to wait till next week

tim
64 cc
2.02-1.60 stainless manley valves
pioner springs,locks/retianers good for .550 lift
^^ not the original springs for the heads(they had been taken off for another set of heads,and those got thrown on just to keep eveything together

what year camaro are the tops off of? glass or lexan?

87 glass i quess never paid much attention to them

ttt