help me out right quick
 

ok, so im nightshading my turn signals today.. i got all the bolts off the front signals but i cant wiggle the damn things out. Taking the headlight out isnt an option so does anyone have any ideas or what im doing wrong? i mean, its off.. i just cant wiggle it out of its hole.. it moves all over but not enough to take all the way out...

-adam

this is what i used adam...

http://www.ls1tech.com/forums/showth...orner+write+up

good luck homie

It should just be the three bolts one on each side and on in the middle and they push out not in.

Ummm... removing headlights are like 80% mandatory, unless u can use a cheerio as a bracelet... i took my headlights out... takes 5 minutes each headlamp, and about 5 minutes to remove the turn signals. Its a hellova lot easier, especially on the paint.

i used masking tape