axles
 

ok i have a question for everyone and im looking for ssome help. i have a 95 3.4L V6 and i want to put posi in the rear, now i can buy the rear end out of a 95 z28 but the housing is bent and i would just remove the guts, but i want to know if the axles in my rear and the new rear r the the same. im not sure if the axle's r bent or not i just wanted to know b4 i buy the rear so that i know if i have to buy new axles or if i can use the axles from my rear. any insite would be great. thanx

Yes, all 4th gen F-body axles are identical.

- Justin

yes surrrr. they are the same

thnks for the help.

did the z28 have traction control? the axles are the same all yes, but traction control car have the sensor rings at the end of each axle while non-tcs cars have a sensor ring on the carrier. if the z28 had tc, and your v6 car didnt, then your abs will not function correctly since it will be missing the sensor ring in the rear pumpkin.

ok well im not sure if the z28 had tcs or not. im tryin to find out. is there anyway that i can put a sensor ring in the pumpkin?