clean up time
 

#1 T04E stage 5 turbo .63/.50AR - 300$
#2 blitz style bov - 75$
#3 turbo xs bov - 75$
#4 misc silicone couplers
2.0 to 2.5 inch 15$
three 2.5 inch couplers 25$ for all
two 2.5 to 3.0 inch couplers 25$ for both
#5 misc nitrous an feed lines $30's each
#6 2,400 stall B&M converter 30 pline 700r4 250$'s
#7 1 set third gen mid length headers $100
#8 edlebrock 650 carb 100$'s
#9 edlebrock air gap 100$'s
#10 walboro 255lph pump new in box 100$'s
#11 new weld draglites with hoosier 26x9x15 non dot slick do5 compound 2 passes no burnouts 450$'s
#12 misc gauges
autometer water temp phantom 15$'s needs new sender
faze afr 50$'s
faze boost/vac 50$'s
more will be added

#1 regal turbo (draw threw carb style) 150# .83/.60AR
#2 misc injectors
3.4 injectors 25$'s
350 tpi injectors 25#'s
30# injectors 100$'s
#3 steel 1.5 rockers new 75$
#4 2 used sbc water pumps 15$'s
#5 assorted automatic flywheels 10$ each
#6 vortec 6-1 fmu 80$'s
#7 2 cherry bomb turbo mufflers offest in/out 2.5 inch 20$'s
#8 brand new ported gen 2 60* heads complete 600$'s
#9 3.4 block cleaned preped and bored .030 over 300$'s
#10 crower crank for 60* motor 1,200 $'s firm
#11 forged 327 small journal H-beam rods machined to fit 60* motors 200$'s
#12 j.e forged pistions for 3.4 for use with aluminum heads 8.5-1 cr with 25cc heads 500$'s
more to add later
slicks = pending sale
fuel pump = pending sale
all turbo stuff except the regal turbo = pending sale

2 seperate alumapro bp-12 enclosures
#1 has original alumapro driver = 500
#2 has a diesil auido driver = 400 both for 750$'s
amps
#1 rockford 301m 400 watts rms/950 peak 200$'s
have to look up specs on the alipne amp but pretty sure its 300/700

nitrous stuff
#1 5 pound no2 bottle Make offer
#2 10 pound nx bottle make offer

misc stuff
#1 tpi/v6 camaro dual snorkle air box make offer
#2 ram air conversion kit for thirdgen camaros make offer

cars
#1 89 rs camaro sold as roller or with new 3.1 engin/built trans/no turbo needs paint/minor body work and a head liner 1Le swaybars/springs wonderbar/and custom stb brace make offer

Care to sell the hood from it?

- Justin

no i dont have another hood to put on the car,unless u can find me one the right color lol

PM Sent....

- Justin

car/w turbo setup is pending a trade in on another car.

The dual snorkel airbox, is this an original or home made? Is it the large round box that fits carb or TBI cars?

ist original,but its a tpi box

how much for the regal turbo?

turbo lg4!!!!!!! lol

i thought u were buying that engine from me
its 150$

i am getting the engine from you..

I just wanted to see how much you wanted for the turbo, because it said blow through carb style or what ever

draw threw

My friend is interested in the 650 carb, shoot him am email when you get a chance. joe_bianco@cable.comcast.com

its gone,i may be able to get another though
updated list
2 seperate alumapro bp-12 enclosures
#1 has original alumapro driver = 500
#2 has a diesil auido driver = 400 both for 750$'s
amps
#1 rockford 301m 400 watts rms/950 peak 200$'s
have to look up specs on the alipne amp but pretty sure its 300/700

#1 regal turbo (draw threw carb style) 150# .83/.60AR
#3 steel 1.5 rockers new 75$
#4 2 used sbc water pumps 15$'s
#5 assorted automatic flywheels 10$ each
this stuff i really need gone
#8 brand new ported gen 2 60* heads complete 600$'s
#9 3.4 block cleaned preped and bored .030 over 300$'s
#10 crower forged crank for 60* motor (3.1/3.4 or used to stroke 2.8 to 3.1/3.4L 1,200 $'s firm
#11 forged 327 small journal H-beam rods machined to fit 60* motors 200$'s
#12 .030 j.e forged pistions for 3.4 for use with aluminum heads 8.5-1 cr with 25cc heads 500$
or take complet longblock for 2,300$'s

delete this thread plz