rear brakes
 

so i converted to disk on the 97, i now have the right e-brake cables now and noticed that the brakes dont lock when i pull on the handel at a roll from idle. arent they supposed to lock or am i mistaken. any help would be appreciated.

They should lock unless you are going to fast or they are out of adjustment.

Yeah, you have to adjust them otherwise it doesn't put enough tension on the cable.

how do i adjust it. if its the alen screw on the caliper its not working because i put it in every position and still nothing

Isn.t there an adjustment on the cable where the 2 rear cables meet the front one (same as 3rd gens, right?)

yea there is a y-block above the rear, that might be it

the adujustment i think is under the center concol on the 4 gens

dont the rear calipers have to adjust first then the ebrake gets tighter? i could be wrong considering this is my first car with 4wdisc.

from my understanding there are screws on the calipers that need to be adjusted and the ebrake handel is "automaticly adjusted"

by that it means hold the button and yank up/let down the ebrake 3 times

exactly