ugh oh...
 

i drove threw a HHUUGGEEEE puddle lastnight on Rt. 18 (i really need to stop driving on that road) and a few seconds after my SES light came on..WTF could i of done?? what could cause this? any help would be great. i would scan it but i dont have one of those things..so ill have to wait till monday to go to my mechanic to find out what it is deffinately...ughh

coulda gotten something wet, caused a misfire or something, throwing the code...did it flash when it came on or did it just come on?

just came on

could be anything...autozone FTW

do they charge to read codes?

-no

in that case... autozone FTW

really? sweet deal... have to remember that

its alwyas been like that bud.

too bad there's none by me so i wouldn't really know that?

no autozones or advance auto parts by you? where do you live? north dakota? :rofl:

at least that i've seen, live in mahwah
only one i know of would be in hackensack

none near me either, closest is in like paterson..and F that

Advance Auto Parts

Autozone

i counted 10 advance auto part stores and 15 autozones within <30 miles of you. :shrug:

closest autozone, 6 miles
closest advance, 21 miles

why go that far when there's a parts shop down the street?

closest one to us is in spring valley. and even thats a journey.

thank you
there's wilson's and ramapo auto parts right in town

1. thats not far.
2. you said there were none by you, that is not true.
3. anymore questions?

I'd probably go to the one in Nanuet first, take 287 and hop off on 14 plops you right by white castle on 59

my light went off today but i think the bulb burned out haha.. does anyone know if the light comes on when you turn the key to the on position without starting it?

the light should come on when you turn the key to the on position.

looks like the bulb blew then haha... ggrreeaaatttttttttttttttt

if the code only throws once, then it will eventually erase itself. if it comes on when the key is in the on position, then its functioning normally. go have it checked out for codes.

this whole hijack was irrelevant since you have a 95 and they can't scan your codes anyway (you have OBDI, they scan OBDII)

Whoa, hold on. Before you start pulling the dash out to change a bulb-

Chances are it was a misfire code that cleared itself out. Your PCM will do that after a number of starts or an amount of runtime, I forget which.

A code will still show up in the PCM's history.