LT1 Parts
 

ALL PRICES ARE OBO AND DO NOT INCLUDE SHIPPING

Stock stuff:
-Complete AIR system $25
-Stock power steering pump $25
http://good-times.webshots.com/photo...97142729AjfTSO
http://good-times.webshots.com/photo...97142729rPtsWR
http://good-times.webshots.com/photo...97142729pUUPFB
-Stock LT1 Camshaft $50
http://good-times.webshots.com/photo...97142729qDrgKV
http://good-times.webshots.com/photo...97142729jtdWzS
http://good-times.webshots.com/photo...97142729EcARGf
-Stock LT1 tensioner $5
-LT1 alternator bracket(bolts to intake manifold) MAKE OFFER
-AIR pump bracket MAKE OFFER
-I have no idea what these are but if you do and want them they're yours
http://good-times.webshots.com/photo...97142729pBAKFe
-50k mile A/C motor $25
http://good-times.webshots.com/photo...97142729ZikJZS
http://good-times.webshots.com/photo...97142729EjykLP
-Stock valve covers $40
-Stock 50k mile lifters $20
-Stock 50k mile shortblock(block, crank, rods, pistons, oil pan) $200

Modified stock stuff:
-95+ timing chain cover with crank sensor, clearanced for double-roller timing chain, water pump hole blocked off $60
http://good-times.webshots.com/photo...97142729OhTXEt
http://good-times.webshots.com/photo...97142729cIzrRf
http://good-times.webshots.com/photo...97142729TeHxqj
http://good-times.webshots.com/photo...97142729dXdunT
-Stock valve covers clearanced for 1.6 roller rockers with like-new(1-hour runtime) gaskets $50
http://good-times.webshots.com/photo...97142729eMBkIn
http://good-times.webshots.com/photo...97142729WGNoSo
http://good-times.webshots.com/photo...97142729SOZJhy
http://good-times.webshots.com/photo...97142729jntINj
http://good-times.webshots.com/photo...97142729wQhkbC
http://good-times.webshots.com/photo...97142729atrpqb
-Electric water pump housing with heater and oil cooler hoses blocked off, like-new(1-hour runtime) 180* t-stat, and like-new(1-hour runtime) coolant temp-sensor $50
http://good-times.webshots.com/photo...97142729YvwgUP
http://good-times.webshots.com/photo...97142729PCwAiO
http://good-times.webshots.com/photo...97142729KkysgR
http://good-times.webshots.com/photo...97142729lHqFhw
-Boxed stock lcas $10
http://good-times.webshots.com/photo...97142729kDCVLv
-(2) Stock 48mm throttle bodies with airfoil installed(only have pics of one but both look the same) $50 EACH
http://good-times.webshots.com/photo...97142729QFScRm
http://good-times.webshots.com/photo...97142729cGZsak
-Stock intake manifold w/ fuel rail and EGR blockoff plates installed$110

Aftermarket stuff:
-30# SVO yellow-top injectors $200
http://good-times.webshots.com/photo...97142729msKJDl
-K-motion K800 springs w/ titanium retainers and 10* locks(10k miles) $200
http://good-times.webshots.com/photo...97142729aYgHdf
http://good-times.webshots.com/photo...97142729xXjWEw
http://good-times.webshots.com/photo...97142729yhEsBZ
http://good-times.webshots.com/photo...97142729EXUMiP
-Stock heads(media blasted with valves cut and lapped) $210
-918 “beehive” springs with upper and lower retainers and locks(Broken-in only never run on street) $200
Pics of heads and valvetrain(click "next" to scroll through all pics
-Custom grind cam 22x/23x, .56x/.56x w/ 1.6 rockers, 110 lsa $250
(Cam was designed to make the same power as the "CC306" but at a lower rpm)

and would these work for 3rd gen heads
Comp 7.200 hardened pushrods(1-hour runtime) $20

same with these
GMPP “Scorpion” 1.6 roller rockers $150

pm sent

as far as compatability I'm not sure...I only know LT1s

pm back at you

u got a pm importent

rockers and pushrods sold

power steering pump should work on a v6 right?

im not really sure...toss up a post on fullthrottlev6 they should know

done. now we wait...

looks like a no go..

sorry...g/l finding one

yeah, thanks....
would have saved me a good amount of money too

ttt only going to keep this up for a week or two before it all hits ebay

well on a 4th gen power stering pump 3.4 is the same as a 3rd witch is about 80 bucks new i installed one on my buddys 94 camaro

thanks. more expensive than the newer ones..
great...

ttt...7 days till ebay...need $$ to fix my car :(

6 days till ebay

5 days till ebay

ttt cloyes double roller,180* stat, and new coil/icm sold

parting out heads...see 1st post for prices