Winter Blowouttttttt!!!!!!!!!
 

I need to make room in my storage units and want to consolidate down to one room instead of two...Any reasonable offer will probably be accepted and trades are open just let me know what you have and i might be able to use

-1969 chevelle ss dash bezel and gauge cluster
-Holley 600 cfm carb shiny manual choke 4160 model thats brand new in box
-T88 88mm Garrett AiResearh turbo
-SBC Edelbrock performer intake pn 4102 for vortec heads
-Mallory chrome ignition coil
-SBC Moroso valve covers painted shiny light blue metallic
-SBC Vortec heads that could use a freshen up
-SBC Centerbolt aluminum valve covers off an iroc
-LED nightwipers in green made by apc performance
-2 sets of ttops 82-92 camaro/firebird
-1993-2003 taillights for camaro red/white with 2 U police Strobes in each taillight from copcar
-1982-1992 style Firebird Taillights nice shape
-fox body mustang dark red Hatch with TINT
-rare firebird gta bag/pouch
-flat wing with 3rd brake light off of a blue 88 camaro convertible
-Bright red 91 firebird mirrors
-93-03 pontiac trans am stock 6 speed shifter
-Front mount intercooler thats a little banged up
-Set of bbc peanut port 454SS heads
-headers for sbc
-sbc cranks...ones a 400 crank
-sbc heads
-aluminum quadrajet 4b intake

-more stuff to come asap...


1986 mustang gt ttop 5 speed car project solid body, Clean title... good t5 in it and good rear.. car is set up for a turbo...i was going with a 88mm setup but decided to pass and put the turbo on my chevelle..car comes with a alot of stuff...has a front mount intercooler with no turbo,some weight reduction as well as alot of other goodies and mustang tricks,,it comes with a 5.0 motor to part build throw through your neigbors window etc.....sell as a whole? parts? dunno yet..see what kinda interst in parts there might be...

2.3L ford SVO mustang turbo block, forged crank,rods,and dished pistons....brand new water pump, oil pan...basically a short block no head or cam for it....

you can instant message me on venom88888 i rarely check email so try and catch me online...
will accept trades if you have something i need
...pm me with any ????'s or need of pics if you cant get me on aol

PM Sent

how much u lookin to get for mustang????

got a few people interested in the stang imma go and take some pics of it tomorow....and you guys can go from there...

Funny I thought this was an f-body website and you guys are asking about a stang. how much for the t-tops for a CAMARO are they glass or plastic,thanks

lol.....yea tell me about it i have better luck on this site with the stang lol....

the ttops are in nice shape and they are mirrored glass... i have 2 sets unfortunantly the keys to them are no where to be found...

hey jared, has the mustang been converted to mass air?

there is no maf on the car....its a project car...the motor turns over smoothly from the crank....but i would take it apart and inspect it then put it back together.....the car is pretty banged up by all means not a show car it needs a passenger side door and mirror taillights and front driver side fender.... i have pics of it.... it comes with a front mount intercooler and alot of other stuff.....if your interested in a project let me know...ican shoot you over some pictures...

http://i17.tinypic.com/48e16qh.jpg

http://i18.tinypic.com/4icxh5h.jpg

because everyone needs a beaterthat they have no reason to care about :)

more pics to those who are interested.....

well i just wanted to know if it had a mass air conversion cause im looking to do it to my mustang

How much for the t88 and what casting Vortecs?

how much for the 4th gen tails with the strobes?

a buddy of mine is looking for a set since he joined the fire dept.