me at dyno day
 

Finally, a vidfrom the dyno meet. Nice runs ron, and I did call that to within under 1 hp, but exactly the torque :)

indeed u did. the cut out also was good for +2hp lol (magnaflow flows really well) almost as good as my cut out.

cut out closed-
run 1- 335.65hp 357.57tq
run 2- 340.05hp 362.22tq

cut out open-
run 3- 340.15hp 359.83tq
run 4- 342.41hp 362.42tq

with all the parts you go through someone might think there was a little more power to it ;)

there will be a lil more power to it this spring/summer ;)

So cut-outs are worth 5hp? I would have thought more.

Still has more balls then any of my rides. :)

your gains will vary, depending on where its located and what catback you have. i gained 2 hp with it open- and i have a magnaflow catback.

if you have a stock catback on there, i would say that the cut out would gain you more hp as opposed to having a magnaflow or a LM on it, with the cut out open

im going with a stock catback to be sneaky :)
i was thinking about doing 2 cutouts after the headers one day.

Ron your not going to be sneaky... You have a magnaflow catback, but its not loud enough to scare women and children so you open the cut out to do it. You are going to have the cut out open all the time so why bother changing anything? I got dibs on the catback

Me- im going with a stock catback to be sneaky
i was thinking about doing 2 cutouts after the headers one day.

reading comprehension owns you :lol:

crap, i thought i had something on you to, by the edit'ed part, but i realized you edited before i posted...unless it took me 40 something minutes to post that..

haha