NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)

- Appearance (http://www.njfboa.org/forums/forumdisplay.php?f=29)

- - Foglights... (http://www.njfboa.org/forums/showthread.php?t=29559)

oh one ls1 SS

10-16-2007 08:59 PM

Foglights...

Is there any company that has a projector housing with HID's for a 02 WS6's foflights? i want to get HID headlights but want to do it right and get projectors with them but there isnt a kit for it so the foglights would have do

thanks.

Tru2Chevy

10-17-2007 01:52 AM

You could always just fab up a projector into your stock housing. Takes some more work, but you can still get good results without blinding everyone else on the road.

Start reading here: http://www.danielsternlighting.com/t...nversions.html

- Justin

oh one ls1 SS

10-17-2007 06:33 PM

yeaa i e-mail led gagues because they have a sealed beam conversion kit for my car and told them i want the kit but want it with projector housing. they said they can get me the housing but i need to fab up my own mounting brackets. any thoughts about that?

Tru2Chevy

10-17-2007 06:51 PM

Mounting brackets shouldn't be too difficult.

See if you can get them to email you some pics of the housing and projector that they would be selling you

- Justin

oh one ls1 SS

10-17-2007 10:06 PM

this is what the guy e-mail me "All you would need to do is make the brackets to hold the housing in place, which is best done with lexan which is a plastic material. Depending on how deep in you mount them you may need to modify the back of the headlight bucket as well."

and this is the projectors the kit has. http://www.ledgauges.com/TAPK.jpg

Tru2Chevy

10-20-2007 10:15 AM

Hmm....I wonder why they want you to make brackets with lexan? I would think that just some relatively thin sheet metal would be fine.

- Justin

oh one ls1 SS

10-20-2007 01:19 PM

:shrug: does it sound like a good kit tho? i dont wanna spend the money on it is its s**t

Tru2Chevy

10-20-2007 04:58 PM

What is the stock headlight setup on your car?

- Justin

oh one ls1 SS

10-21-2007 09:56 PM

currently all stock

Tru2Chevy

10-21-2007 10:18 PM

Quote:

Originally Posted by oh one ls1 SS (Post 389138)

currently all stock

I know....I mean what type of lights are they? Sealed beam? 9006, 9007?

- Justin

oh one ls1 SS

10-21-2007 11:17 PM

uummm.. stock bulbs. sealed beam n not sure that size. havent had to replace one yet but when i had my 94 camaro i hated replacing these type of lights.

Tru2Chevy

10-22-2007 11:27 AM

You may want to just find out the size and contact this guy:

http://www.danielsternlighting.com/home.html

I'm replacing the stock sealed beam headlights on my Jeep per his advice. He'll be able to guide you better than I.

- Justin

All times are GMT -5. The time now is 07:31 AM.