intake for a 1987 camaro.
 

ok so the camaro has the front intake in the car close to ram looking but im not sure what to do about upgrading the intake and how to. the car is TPI not carburated so had to ask. and where can i find something like this. web sites? thanks guys8-)

cut the hell out of the baffles on the underside of it for starters

The factory airbox actually flows enough air to support most street applications. You can open the holes a little and remove the splash shields if you want just watch driving through water. You can also go as far as removing the fog lights and running tubing from the intake box down to that area but that's hack job if you ask my honest opinion.

cut a hole in the hood, level with the bottom of the TB, and run some rubber hose to it! Youll get all the ram air that you need. dont use a good hood for that though