NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   Transmission and Driveline (http://www.njfboa.org/forums/forumdisplay.php?f=38)
-   -   Speedo Probs (http://www.njfboa.org/forums/showthread.php?t=36027)

ZeroCool8891 08-04-2008 08:42 PM

Speedo Probs
 
ok this is what i have, i just put a 95 T56 in my 88 vert now my vert is speedo driven and the T56 is VSS, now how can i make my speedo drive work with the VSS. i heard of some box but i have no idea what the heck that is and i dont want to convert a hole bunch of stuff over. So any input would work prob something so easy but pricy lol

Thanks

BonzoHansen 08-05-2008 09:29 AM

New speedo (maybe you can use a later model one instead of aftermarket?) or cable-x box. IIRC Jags That Run have a way to use a cable with a t56, but I think you have to buy their custom tailhousing.

WildBillyT 08-05-2008 09:53 AM

Quote:

Originally Posted by BonzoHansen (Post 473008)
New speedo (maybe you can use a later model one instead of aftermarket?) or cable-x box. IIRC Jags That Run have a way to use a cable with a t56, but I think you have to buy their custom tailhousing.

Yep, those are your options.

ZeroCool8891 08-05-2008 10:36 AM

F that i ckecked the prices on that over 350+ bucks i sont want to spend that, what about if i was a 91-92 dash and harness, but sice i have TPI for an 88 would i have to upgrade for a 91-92 meaning the harness, speed denisty so on.

WildBillyT 08-05-2008 10:53 AM

Quote:

Originally Posted by 88 Iroc Vert (Post 473018)
F that i ckecked the prices on that over 350+ bucks i sont want to spend that, what about if i was a 91-92 dash and harness, but sice i have TPI for an 88 would i have to upgrade for a 91-92 meaning the harness, speed denisty so on.

Summit has a 3 1/8" Autometer Electric speedo for $125 if you go that route.

ZeroCool8891 08-05-2008 10:57 AM

will that work the way i need it to with no probs, i just dont want to buy something that wont work, being out of a job im tring to becareful on what i buy.

ZeroCool8891 08-06-2008 06:29 PM

ok this is what i did i had a dig dash i huked it up, i found a plug that fits in the VVS on the trans, i huke it up useing the wireing from a 92 rs dash, every wire goes to where it came from, and huke it all up rite now the prob i have now is that it works up to 36MPH and then goes zero i tried everything and i dunno why it goes to that so thats what i need to fig out.


All times are GMT -5. The time now is 07:35 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.